Enterprise

BUYER'S GUIDE

dvLED Install Gotcha #4: Do You Actually Have the Right Tools?

You can’t improvise your way through a Direct View LED (dvLED) installation.

Missing the right tool on the day doesn’t mean a quick run to the hardware store. It means a stalled install, a frustrated client and a job that costs more than it should have.

Here’s the fix. It all happens before you show up, not on install day.

What tools does a dvLED install actually require?

The equipment list goes beyond what most general AV installs demand. A few items are non-negotiable.

A panel lift or scissor lift is often needed when a ladder is not safe due to the height. Trying to install with just a ladder when it is too high can lead to lost time and risks damage.

Manufacturer-specific tools matter more than people expect. Many systems have unique mounting and alignment requirements, and generic substitutes often don’t fit or don’t work.

A laser level is essential, but there’s a difference between owning one and using it correctly. Make sure the right person is running it, and match the tool to the job. A small beam meant for a 6-inch level isn’t the right choice for a large-format wall.

What’s the one tool most crews forget?

The ones you can’t grab at a hardware store on the way to the job. That’s the pattern behind almost every tool-related delay.

Some gear has to be rented and reserved ahead of time. A panel lift or scissor lift is the obvious one. Show up without it and there’s no quick fix, and a rental you forgot to book is a day you don’t get back.

Then there are the manufacturer-specific tools that ship with the system itself. Spare tiles, tile removal tools and other items packed in the box are easy to leave behind. Check the packaging before you leave and bring what came with the display.

Finally, use ESD protection on every job. Static damage to LED modules is invisible at install time and shows up later as dead pixels or early failures. Pack spare ESD gloves too, in case a set isn’t included.

This is one place an all-in-one system quietly helps. Every ViewSonic All-in-One dvLED ships with calibrated spare tiles, ESD glove protection and suction tools included, so the gear you’re most likely to forget is already in the box.

How do you build a standard dvLED install kit?

Plenty of installation teams try to run off memory alone. Professionals run from a documented, standardized install kit checklist that assigns responsibility for each item before every job.

That checklist should be a non-negotiable part of your pre-install process, reviewed and signed off by the project lead before anyone leaves for the site. Fewer surprises on-site means fewer delays, and delays are what eat your margin.

Preparation is what makes an install fast. Not rushing.

Frequently Asked Questions

What tools do you need to install a dvLED wall?

At minimum, a panel or scissor lift for anything above eye level, the manufacturer’s specific mounting tools, a properly sized laser level, ESD protection and spare modules on-site. Build these into a documented kit checklist for every job.

Why is ESD protection important for dvLED?

Static discharge can damage LED modules in ways you can’t see at install time. The damage surfaces later as dead pixels or early failures. ESD protection is inexpensive to use and prevents costly callbacks, which is why it should never be skipped.

Do you need spare dvLED tiles on-site?

Yes. Construction environments are tough on hardware, and a dropped tile can crack or damage a module that needs to be swapped on the spot. Without spares on hand, that one damaged tile can stall the whole install while you wait on a replacement to ship. ViewSonic dvLED includes 5% calibrated spare tiles with every unit, so a color-matched replacement is ready and the project stays on schedule.

Show up to every install prepared

Want the complete framework for dvLED installation readiness?

The ViewSonic^® dvLED Certification Program is a hands-on, two-day course led by ViewSonic Solutions engineers. Graduates earn CTS and CTS-I renewal units. It covers pre-install checklists, structural planning and real-world field techniques. Reserve your spot today.

Direct View LED (dvLED) Installation Disclaimer: This installation gotcha blog series is provided for informational and convenience purposes only and should not be treated as a comprehensive architectural or engineering blueprint. Actual installation performance, structural suitability, and product outcomes may vary depending on system configuration, network conditions, usage environment, wall construction, agency or local code requirements and other factors. Drywall alone is not a structural mounting surface and must never be used as the sole means of support for a dvLED system. Proper wall flatness verification, load-bearing reinforcement, dedicated circuit power routing, and the use of commercial-grade hardware are the sole responsibility of the customer, installer, or system integrator. ViewSonic does not design, inspect, or certify wall structures or independent installation methods. Installers must consult a licensed contractor, structural engineer, or qualified AV professional prior to execution. ViewSonic assumes no liability for any errors, equipment damage, property damage, or personal injury, including death, caused as a result of incorrect field installation, human factors, or failure to comply with local codes and safety instructions. [26DIG-ENT1494e4]

BUYER'S GUIDE

dvLED Install Gotcha #3: “I Have an Outlet, I’m Good, Right?”

You have power. You have an outlet on the wall. But that’s just half the story.

Power is the most underestimated part of a Direct View LED (dvLED) installation. Get it wrong and you might not see the problem on install day at all. Your client sees it later, as system instability, early component failures and service calls that never should have happened.

Why isn’t a standard outlet enough for a dvLED wall?

A typical wall outlet wasn’t designed for the demands of a large dvLED install, and the issues stack up fast.

Shared circuits cause voltage drops when other devices pull power on the same line. Flush-mounted outlets tucked behind panels leave no clearance for connectors, which makes the system almost impossible to service without pulling tiles. Cables routed without attention to bend radius cause alignment issues from day one. And power components crammed into tight spaces with no airflow run hot, and hot components fail early.

Here’s the pattern. Some of these problems show up on install day. Others don’t show up for months.

What does proper dvLED power planning look like?

Start with dedicated circuits. This keeps one fault from taking down the whole display. Larger walls often need more than one circuit to cover the full load.

Plan for service access. Recessed electrical boxes create the clearance connectors need, and 90-degree connectors manage cable bend radius without routing cables in ways that damage them over time. If a technician can’t reach the power without pulling the wall apart, the plan isn’t finished.

Design for heat. Airflow and thermal management belong in the conversation before installation begins, not as an afterthought once equipment is already in the wall.

What’s the simple test for a good power plan?

Ask one question before every install. Is there sufficient power for maximum load that is accessible without interference? If the answer is no, the power plan needs another pass.

Power is never an afterthought on a professional installation. It’s infrastructure. Plan it like infrastructure, or plan on callbacks.

Frequently Asked Questions

Can you plug a dvLED wall into a standard outlet on a shared circuit?

Not safely for a large install. A standard outlet and shared circuit can cause amperage overloads and trip the circuit breaker, leading to lost power and unnecessary downtime. Most dvLED walls need dedicated circuits per section, planned service access and proper heat management designed in before installation.

Why do some dvLED power problems show up right away and others months later?

Some problems show up on day one. If a cable bend radius is too tight, you will see alignment issues the moment the wall goes up. Others take longer. Shared circuits can trip later when other equipment is added, and trapped heat wears components down gradually. So the install looks fine on day one, then instability and early failures appear months later as service calls.

Build power systems that actually last

Ready to take the guesswork out of your dvLED power design?

The ViewSonic^® dvLED Certification Program is a hands-on, two-day course led by ViewSonic Solutions engineers. Graduates earn CTS and CTS-I renewal units. It covers pre-install checklists, structural planning and real-world field techniques. Reserve your spot today.

Direct View LED (dvLED) Installation Disclaimer: This installation gotcha blog series is provided for informational and convenience purposes only and should not be treated as a comprehensive architectural or engineering blueprint. Actual installation performance, structural suitability, and product outcomes may vary depending on system configuration, network conditions, usage environment, wall construction, agency or local code requirements and other factors. Drywall alone is not a structural mounting surface and must never be used as the sole means of support for a dvLED system. Proper wall flatness verification, load-bearing reinforcement, dedicated circuit power routing, and the use of commercial-grade hardware are the sole responsibility of the customer, installer, or system integrator. ViewSonic does not design, inspect, or certify wall structures or independent installation methods. Installers must consult a licensed contractor, structural engineer, or qualified AV professional prior to execution. ViewSonic assumes no liability for any errors, equipment damage, property damage, or personal injury, including death, caused as a result of incorrect field installation, human factors, or failure to comply with local codes and safety instructions. [26DIG-ENT1494e3]

BUYER'S GUIDE

dvLED Install Gotcha #2: Can Your Wall Actually Support the Weight?

A Direct View LED (dvLED) display isn’t just a screen. It’s a system.

Panels, mounting structure, cabling and power components all go on your wall, and all of it adds up.

The question isn’t whether your wall can hold the display during the install. It’s whether it’s built to carry the full load, day after day, for years. This is the gotcha that doesn’t just slow an install down. It stops it completely.

What does a dvLED system actually weigh?

That depends on the size and configuration, but the weight adds up faster than most people expect. A large Direct View LED wall, once you count panels, mounting structure and cabling, can reach several hundred pounds spread across the surface. Standard drywall anchored into wood studs was never rated for that kind of distributed load, especially with years of vibration and thermal cycling working against it.

Before anything goes up, confirm four things: the total system weight (panels plus mounting plus cabling), the stud spacing, the mounting surface type and whether structural backing is required to carry the load safely.

What do you do when the wall isn’t ready?

For most commercial installs, the answer is adding structural backing before the mount goes up. Common solutions include Unistrut channel systems, steel stud framing and plywood backing across the mounting area. The right choice depends on the wall construction, the total load and the mounting system you’re using.

For larger or custom walls, bring in a structural engineer early. A quick review at the planning stage costs far less than finding a load problem mid-install, or worse, after the display is already live and a client is watching.

What’s the one rule that prevents most structural problems?

Add a structural verification step to every pre-install checklist. Confirm the mounting surface. Confirm the load rating. Get written sign-off before your crew arrives. If a structural review is needed, schedule it weeks out, not as a last-minute check the morning of.

The fastest way to slow an install to a stop is to find a structural problem on day one. The fix is almost always cheaper and faster when you catch it on paper.

Frequently Asked Questions

How much does a dvLED video wall weigh?

It varies by size and configuration, but a large dvLED wall including panels, mounting and cabling can reach several hundred pounds distributed across the surface. Always confirm the total system weight before choosing a mounting method or approving the wall.

Can you mount a dvLED wall on drywall?

You can, but only if the drywall surface is flat within tolerance and the structure behind it can carry the load. Install on the studs behind the drywall and use plywood backing if you need a continuous mounting surface. Many walls need shims or a substructure to hit the flatness spec. Always verify with a laser level before install day.

When should you involve a structural engineer?

Bring in a structural engineer early for large or custom dvLED walls, or any time the load or wall construction is uncertain. A short planning-stage review costs far less than discovering a load problem during or after installation.

Build structural planning into every job

Ready to streamline your site prep and deliver seamless installations from day one?

The ViewSonic^® dvLED Certification Program is a hands-on, two-day course led by ViewSonic Solutions engineers. Graduates earn CTS and CTS-I renewal units. It covers pre-install checklists, structural planning and real-world field techniques. Reserve your spot today.

Direct View LED (dvLED) Installation Disclaimer: This installation gotcha blog series is provided for informational and convenience purposes only and should not be treated as a comprehensive architectural or engineering blueprint. Actual installation performance, structural suitability, and product outcomes may vary depending on system configuration, network conditions, usage environment, wall construction, agency or local code requirements and other factors. Drywall alone is not a structural mounting surface and must never be used as the sole means of support for a dvLED system. Proper wall flatness verification, load-bearing reinforcement, dedicated circuit power routing, and the use of commercial-grade hardware are the sole responsibility of the customer, installer, or system integrator. ViewSonic does not design, inspect, or certify wall structures or independent installation methods. Installers must consult a licensed contractor, structural engineer, or qualified AV professional prior to execution. ViewSonic assumes no liability for any errors, equipment damage, property damage, or personal injury, including death, caused as a result of incorrect field installation, human factors, or failure to comply with local codes and safety instructions. [26DIG-ENT1494e2]

BUYER'S GUIDE

dvLED Install Gotcha #1: What Happens When Your Wall Isn’t Flat?

Most Direct View LED (dvLED) installs don’t fail because of the technology. They fail because of the wall behind it.

Wall flatness is the first thing a dvLED install team should verify, and it’s the last thing many crews actually check before they show up on-site. Get it wrong and a one-day install turns into a two- or three-day rework job. The panels are fine. The wall was never ready.

This is the first in our series on the five most common dvLED install gotchas, and it’s the one that catches even experienced teams off guard.

What’s the acceptable flatness tolerance for a dvLED wall?

For a clean dvLED install, the mounting surface needs to be flat to a tight tolerance across the whole wall. A common target is around 5mm over the full surface. Go beyond that and you start to see the problems that make a wall look cheap: visible seams between modules, uneven pixel alignment and brightness that shifts from tile to tile.

Here’s the hard part. Walls that look perfectly flat to the naked eye fail this spec all the time.

Why does wall flatness catch installers off guard?

The problem isn’t that walls are obviously crooked. It’s that small imperfections add up. A slight bow in drywall, framing that isn’t consistent behind the surface, a little waviness in plaster or concrete. On a 4-foot section, nobody notices. Across a 20-foot display wall, those small deviations stack into a seam you can see from across the room./span>

There’s a money side to this too. Every client asks the same question before an install: how long will this take? If you quoted a flat wall and you find a bowed one on day one, your timeline and your margin both take the hit.

Discovering the problem on install day leaves you two options. Shim every mount point by hand, or build a substructure from scratch. Neither is fast. Neither is cheap. And both can delay installation by days.

How do you prevent flatness problems before install day?

Measure the wall before install day, not the morning of. Run a laser level across the full surface, document every deviation and pick your correction strategy in advance. When you plan the fix ahead of time, it’s a task. When you find it live, it’s a crisis. If you cannot measure beforehand, assume the wall isn’t flat and start planning accordingly.

Set the standard with your client up front. Put the flatness requirement in writing, get structural sign-off and build correction time into the project plan instead of hoping your contingency budget covers it.

What belongs on your pre-install flatness checklist?

Keep it simple and do it every time.

First, confirm the wall type and construction. Then laser-level the full surface and log any uneven spots. Compare those numbers against your flatness specs. You should choose your correction method, like shims or a substructure, well before install day.

Don’t forget to get written structural sign-off from the client.

If you can’t check the wall ahead of time, assume it isn’t flat. Prepping early keeps you from facing costly delays on install day.

Frequently Asked Questions

What flatness tolerance does a dvLED wall need?

Most dvLED installs target a flat mounting surface within 5mm across the full wall. Beyond that, you risk visible seams, uneven tile alignment that can’t be fixed once the panels are mounted.

Can you install dvLED on drywall?

You can, but only if the drywall surface is flat within tolerance and the structure behind it can carry the load. Install on the studs behind the drywall and use plywood backing if you need a continuous mounting surface. Many walls need shims or a substructure to hit the flatness spec. Always verify with a laser level before install day.

Get certified before your next install

Want to build the habits that separate fast, profitable installs from expensive rework calls?

The ViewSonic^® dvLED Certification Program is a hands-on, two-day course led by ViewSonic Solutions engineers. Graduates earn CTS and CTS-I renewal units. It covers pre-install checklists, structural planning and real-world field techniques. Reserve your spot today.

Direct View LED (dvLED) Installation Disclaimer: This installation gotcha blog series is provided for informational and convenience purposes only and should not be treated as a comprehensive architectural or engineering blueprint. Actual installation performance, structural suitability, and product outcomes may vary depending on system configuration, network conditions, usage environment, wall construction, agency or local code requirements and other factors. Drywall alone is not a structural mounting surface and must never be used as the sole means of support for a dvLED system. Proper wall flatness verification, load-bearing reinforcement, dedicated circuit power routing, and the use of commercial-grade hardware are the sole responsibility of the customer, installer, or system integrator. ViewSonic does not design, inspect, or certify wall structures or independent installation methods. Installers must consult a licensed contractor, structural engineer, or qualified AV professional prior to execution. ViewSonic assumes no liability for any errors, equipment damage, property damage, or personal injury, including death, caused as a result of incorrect field installation, human factors, or failure to comply with local codes and safety instructions. [26DIG-ENT1494e1]

SOLUTION BRIEF

How a Financial Institution Transformed Its Boardroom with a 136” All-in-One Direct View LED Display

SOLUTION BRIEF

How a Global Beverage Enterprise Organization Uses Two ViewSonic LDS138-151 Displays to Cover an Entire Corporate Campus

What Challenge Was This Enterprise Organization Trying to Solve?

This global beverage company has a large, multi-building corporate campus. Its main lobby and common areas needed a polished, professional way to greet visitors. The organization wanted a solution that could deliver welcome messages, real-time company news, branding videos and guest greetings that would make a strong first impression on clients.

Individual departments across the campus needed a large-format display for town halls, meetings, live event streaming and multi-language presentations. However, buying and installing a fixed display in every building wasn't practical.

Why Did an All-in-One, Mobile dvLED Fit This Project?

The team discovered ViewSonic's dvLED lineup at InfoComm and didn't formally evaluate other vendors. What stood out was the combination of an All-in-One design with no separate components to integrate and true portability that allowed it to travel between buildings.

The LDS138-151 glides on 360-degree wheels and its foldable design fits into most elevators. This feature helped the shared-display model work. A single unit could travel from the main lobby up into a different building's floor for a town hall, then move again the next week.

What ViewSonic Solution Did They Deploy?

The company has purchased two LDS138-151 138" All-in-One Mobile Direct View LED displays and is now evaluating additional units to use across the campus.

• Both displays run digital signage in the main lobby and common areas: welcome messages, real-time company news, branding videos and guest greetings for visitors and clients.
• The same two displays also travel across campus for internal meetings, town halls, internal events, presentations and live event streaming, wherever a department needs a large-format display that week.
• Because both units are All-in-One and mobile, either one can move between signage duty and event duty as needed. That flexibility gives the campus continuous digital signage plus on-demand access to a large-format display for events, all from the same two units.

For the full specs and product details of our latest generation mobile dvLED: ViewSonic^® 136-152

What Does the Deployment and Day-to-Day Use Look Like?

Because the LDS138-151 is All-in-One, there's no separate cabinet, power, processing or mounting system to coordinate between moves. Its foldable, mobile design lets it roll into most elevators and travel between buildings on its own motorized, height-adjustable stand. It then stores away in a custom flight case between uses, without needing reinstallation or recalibration each time it's used.

That's what makes the internal-rental model work: a department can reserve the display, have it rolled over and up to their floor and use it for a town hall or event. Then they can send it back, without the lead time or cost of specifying a new fixed display for each space.

What Results Has the Company Seen?

With two displays in rotation, the company covers two needs that would otherwise require separate hardware in every building. The setup delivers a consistently polished, professional visitor experience in its main common spaces, plus a flexible, shared large-format display resource that departments can book for meetings, town halls, internal events and presentations.

The company is now considering purchasing additional LDS138-151 units to extend the same shared-display approach to more of the campus.

Frequently Asked Questions

What Is a Mobile All-in-One dvLED Display, and Why Do Large Campuses Use Them?

A mobile All-in-One dvLED display, like ViewSonic's LDS138-151, integrates cabinets, power, processing and mounting into a single foldable unit that can be rolled between rooms or buildings and set up in minutes without a system integrator. Large, multi-building campuses use them to serve more than one space with a single display asset, instead of installing separate fixed displays everywhere they might be needed.

Can a Large dvLED Display Fit in a Standard Elevator?

Yes, with the right design. The ViewSonic LDS138-151 has folding sides that let it collapse down to fit into most elevators, which is what allows a single 138" display to move between floors and buildings on a multi-building campus instead of staying fixed in one location.

What Is the ViewSonic LDS138-151 Used for?

The LDS138-151 is used for both digital signage in lobbies and common areas (welcome messages, news, branding videos) and as a shared, movable display for internal events like town halls, meetings and live-streamed presentations across multiple buildings or floors.

What Are the Benefits of an All-in-One dvLED Display for Corporate Campuses?

An All-in-One dvLED display removes the need to separately source and integrate cabinets, power, processing and control. This means it can be deployed, moved and reused across multiple spaces without a new system design each time. For a multi-building campus, that means one display, on wheels and elevator-ready, can support both permanent signage and rotating internal events, rather than requiring dedicated hardware in every room.

How Many Mobile dvLED Displays Does a Large Campus Need?

It depends on how many use cases need to run at once. Some organizations start with a single mobile dvLED display and add more as demand grows, since each additional unit is still All-inOne and doesn't require new system integration. In this case, the customer started with two LDS138-151 units. They used one for lobby signage and another for events. The company is now evaluating additional units to extend that same coverage further across the campus.

Ready to Explore a Similar Solution?

Talk to a ViewSonic Field Solutions Engineer about how a mobile All-in-One dvLED display could work across your own campus or multi-building footprint.

ViewBoard 136-inch LDM136-151 All-in-One Direct View LED Display

SOLUTION BRIEF

How a Global Event Production Company Uses ViewSonic LDS138-151 Displays as a Flexible Video Solution Across Events

What Challenge Was This Company Trying to Solve?

This organization is a global event production and audio-visual services company that delivers live event technology for its clients. This includes presentations, meetings, hotel meeting space rentals and tradeshow booths, often in the same week and sometimes the same day.

Rather than needing a single display type for one permanent space, the company needed a video screen that could keep up with its event calendar. The same unit might anchor a keynote on Monday, act as ballroom signage on Wednesday and sit in a tradeshow booth on Friday.

Buying and staging different hardware for each of those formats wasn't practical for a business that had to move fast and stay flexible from client to client.

Why Did an All-in-One, Mobile dvLED Fit This Project?

The team wanted a single display asset that wasn't locked into one type of event or one type of space. They were looking for something that could move with the business instead of sitting in a warehouse waiting for the right job.

An All-in-One mobile dvLED display fit that need well. Because it's self-contained and travels on its own wheeled stand, the same unit can go from a corporate presentation to a hotel meeting space to a tradeshow floor without being reconfigured or rebuilt for each format. That turns one piece of equipment into a flexible asset the company can point at whatever event needs it that week.

What ViewSonic Solution Did They Deploy?

The company deployed multiple 138" ViewSonic^® LDS138-151 All-in-One Mobile Direct View LED displays to its event and rental fleet.

• The displays are used as a high-profile video screen for presentations, meetings and general sessions one week, then redeployed as signage for a hotel meeting space rental the next.
• They're also brought to tradeshows as a standalone display or folded into a larger production, anchoring a booth or stage as one part of a bigger build. ViewSonic Americas — Event Production Brief
• Because every unit shares the same All-in-One design, the fleet can shift to match demand across event formats instead of keeping separate, dedicated hardware on hand for each type of event.

For the full specs and product details of our latest generation mobile dvLED: ViewSonic LDS136-152.

What Does the Deployment and Day-to-Day Use Look Like?

Because the LDS138-151 is all-in-one, the same unit works the same way no matter whichcevent it's headed to next. It folds down, rolls in on 360-degree wheels, sets up on its own motorized, height-adjustable stand, then packs back into its custom flight case.

That consistency is what lets the display move across such different event types. A unit running a corporate general session on Monday can be signage in a hotel ballroom by Wednesday and part of a tradeshow booth the following week, without ever needing to be a different piece of equipment for each job.

For the full specs and product details of our latest generation mobile dvLED: ViewSonic^® 136-152

What Results Has the Company Seen?

The company now has one flexible display format that covers a wide range of what it produces: presentations and meetings, hotel signage rentals, and tradeshow builds, instead of maintaining separate hardware for each. That flexibility lets the fleet move to wherever demand is that week rather than sitting idle between jobs suited to only one format.

Frequently Asked Questions

What Is a Mobile All-in-One dvLED Display, and Why Do Event Production Companies Use Them?

A mobile All-in-One dvLED display, like ViewSonic's LDS138-151, integrates cabinets, power, processing and mounting into a single foldable unit that rolls into place and sets up in minutes. Event production companies use them because a single unit can serve presentations, signage and tradeshow builds alike, instead of requiring different display hardware for each event type.

How Does a Mobile dvLED Display Support Different Types of Events With the Same Hardware?

Because it's self-contained and easy to move, the same mobile dvLED unit can function as a presentation screen one day, hotel meeting space signage the next, and a tradeshow display after that, all without being reconfigured or rebuilt for each format. It also packs into its own movable case between events, so it's easy to store when it's not on the road.

Can a Mobile dvLED Display Be Used for Tradeshows and Hotel Meeting Spaces?

Yes. Because it's foldable and travels on 360-degree wheels in its own flight case, a mobile dvLED display like the LDS138-151 can easily move between hotel ballrooms, meeting spaces and tradeshow floors.

What Is the ViewSonic LDS138-151 Used for?

The LDS138-151 is used as a large-format video screen across a wide range of event formats: presentations, meetings, general sessions, hotel signage rentals and tradeshow displays.

How Does a Mobile dvLED Display Fit Into a Full Event Production, Not Just a Single Screen?

Because it's self-contained, a mobile dvLED display can be one element of a larger production, staging, lighting and audio included, without requiring its own dedicated rigging crew, which frees up production time for the rest of the build.

Product Specifications

Ready to Explore a Similar Solution?

Talk to a ViewSonic Solutions Engineer about how a mobile All-in-One dvLED display could give your own event production or rental fleet one flexible display asset for presentations, signage and tradeshow builds alike.

ViewBoard 136-inch LDM136-151 All-in-One Direct View LED Display

SOLUTION BRIEF

How a Global Enterprise Replaced Conference Room Projectors with All-in-One dvLED Displays

What Challenge Was This Enterprise Trying to Solve?

This enterprise wanted to reimagine a heavily used, shared conference center at one of its corporate campuses. The space is built around movable partitions (slider walls) that let staff open up adjoining rooms and combine them into one larger venue.

The center's existing projectors were dated, both in image quality and in the amount of upkeep they required to keep looking good. Leadership wanted a genuine “wow factor” for a room this visible and this heavily booked: a modern, high-impact look paired with a display that didn't need constant attention to stay that way.

Why Did an All-in-One dvLED Display Fit This Project?

As part of its evaluation, the company compared ViewSonic's All-in-One dvLED display against a competing dvLED product from another manufacturer. ViewSonic's solution held up reliably and delivered the high-impact look the company wanted for a flagship meeting space.

That side-by-side comparison settled the decision. The company needed a display technology reliable enough for a room in constant use by many different teams, and durable enough to hold up to the moves, re-staging and heavy day-to-day traffic that come with a shared, high-turnover meeting space with movable walls. ViewSonic's dvLED proved out on both counts.

What Role Did Maintenance Play in the Decision?

Maintenance turned out to be just as important as image quality. The company wanted a display that looked new and modern from day one, and one it could set up once and stop thinking about, not something that needed regular attention to keep looking that way.

The LDM163-182 delivered on both fronts. Its All-in-One Direct View LED technology gives the room a sharper, more modern look than the previous setup, and it needs very little ongoing maintenance to maintain that look over time. If something does go wrong, the LDM163's front-serviceable design lets a technician access and replace an individual module from the front of the display, without pulling down or replacing the entire unit. The LDM163 also carries IP and IK ratings, adding a layer of protection against dust, impact and accidental damage in a high-traffic areas.

What ViewSonic Solution Did They Deploy?

The company installed five ViewSonic^® LDM163-182 displays across the conference center. There was one 163" All-in-One Preconfigured Direct View LED unit for each room that was connected by the slider-wall system.

• Each display delivers a single, high-impact visual presence with a modern, sharp look suited to a flagship conference environment.
• As an All-in-One dvLED display, the LDM163-182 integrates its cabinets, power, processing and mounting as a single preconfigured system, which simplified an install across five rooms rather than five separate custom builds.
• Unlike the room's old projectors, the dvLED display's brightness holds up regardless of ambient light, so image quality doesn't dip when shades are open or the lights are on.
• Front-serviceable access means any issue can be addressed by servicing an individual module from the front of the display, without removing or replacing the entire unit.

What Does the Deployment Look Like?

The install is notably clean: rather than running visible cabling along walls or floors, the installation team routed cabling up into the ceiling, keeping each room's finished look uncluttered and consistent with the rest of the corporate campus.

Each of the five rooms functions independently for smaller meetings, and opens into the adjoining rooms via the slider walls for larger, all-hands-style sessions. That flexibility scales the space from a single 100-person room up to a combined 300–500-person space, with a dvLED display anchoring each segment.

What Results Has the Company Seen?

The conference center now has the visual impact the company was looking for: a consistently sharp, vivid, modern image across every room, with none of the cable clutter that would have undercut the space's finished look. It also replaces the motorized screens the old projector setup required, since each dvLED display installs directly with nothing to lower or retract.

Just as important, the choice has held up in practice. The displays continue to perform reliably under constant, high-traffic use, validating the outcome of the company's side-by-side evaluation against the competing dvLED product.

Maintenance overhead has dropped too. The displays need very little day-to-day upkeep, freeing facilities staff from the routine maintenance the previous setup demanded.

Frequently Asked Questions

What Is an All-in-One dvLED Display Used for in a Corporate Conference Room?

An All-in-One dvLED display is typically used as the main presentation screen in high-visibility or high-traffic conference spaces, giving the room a brighter, more modern, more consistent image that holds up under frequent use.

Why Are Companies Upgrading to dvLED Displays in Conference Rooms?

Companies are moving to dvLED for the combination of a sharper, more modern look and far less ongoing maintenance than older display technology required. For flagship meeting spaces, that upgrade in both appearance and upkeep is a major draw.

What Maintenance Does an All-in-One dvLED Display Need?

Very little. Once installed, an All-in-One dvLED display is largely a set-it-and-forget-it solution, with far less ongoing maintenance than older display technology required to keep its image quality consistent. All ViewSonic dvLEDs carry IP and IK ratings for real-world environments, which helps cut down on downtime and service calls from accidental damage.

What Happens if Something Goes Wrong With a dvLED Display After It's Installed?

ViewSonic's All-in-One dvLED displays are front-serviceable, so a technician can access and replace an individual module directly from the front of the display, without removing or replacing the entire unit. Each ViewSonic dvLED also ships with factory-calibrated spares, so a replacement module matches the rest of the display right out of the box.

How Does an All-in-One dvLED Design Compare to Other dvLED Products on Reliability?

Reliability can vary significantly across dvLED products, and companies evaluating options for high-traffic spaces often run side-by-side comparisons before deciding. ViewSonic's All-in-One dvLED displays feature a preconfigured system with integrated cabinets, power, processing and mounting in a single setup. This helps reduce the points of failure seen in less integrated solutions.

Ready to Explore a Similar Solution?

Talk to a ViewSonic Solutions Engineer about how a large-format All-in-One dvLED display could upgrade a conference center, shared meeting space, or other high-visibility corporate environment.

ViewBoard 136-inch LDM136-151 All-in-One Direct View LED Display

SOLUTION BRIEF

How a National Retailer Replaced Third-Party Docking Stations with ViewSonic Docking Monitors

What Challenge Was This Organization Trying to Solve?

This organization had standardized on the same monitor setup for years, and as it prepared to move into a new corporate office, it saw an opportunity to rethink that standard rather than simply replicate it in the new space.

The existing setup relied on third-party docking stations to connect each desk's monitor, keyboard, mouse and peripherals to a laptop, one more component to source, manage and eventually replace. Moving into a new location gave IT a clean opportunity to consolidate that setup rather than carry the same multi-piece configuration into the new office.

Why Did ViewSonic's Docking Monitors Fit This Project?

The organization wanted a monitor that could replace the third-party dock outright, not just sit next to it. ViewSonic's VG2758-2K docking monitors build the dock into the monitor itself, so a single USB-C cable handles video, data and up to 100W of power delivery between the laptop and the monitor.

That consolidation also simplified the rollout. Because the whole setup connects in a clean daisy chain instead of a separate dock, IT could standardize the same configuration across every desk in the new office without a more complex, multi-vendor install.

What ViewSonic Solution Did They Deploy?

The retailer deployed ViewSonic^® VG2758-2K docking monitors as the standard primary solution for every desk in its new corporate office (roughly 1,600 units). These were paired with a secondary VG2752-2K monitor at each desk, a matching partner to the VG2758-2K for a two-monitor setup.

• VG2758-2K: 27" QHD (2560x1440) docking monitor with built-in 100W USB-C, RJ45 Ethernet and a 5-port USB hub, replacing the third-party dock at each desk.
• A secondary VG2752-2K monitor, daisy-chained off the primary VG2758-2K over a single USB-C cable, giving every employee a standard two-monitor setup.
• Daisy chain connectivity between the two monitors reduces cabling to one connection per desk rather than separate docks and cables for each monitor.
• Between the two monitors, that's nine USB ports per desk for keyboard, mouse, phone charging and other peripherals, more than most docking stations offer.

What Does the Deployment Look Like?

Each desk in the new office is built around the same standard configuration. This includes a VG2758-2K connected to the user's laptop over a single USB-C cable that also delivers power and data, and a secondary VG2752-2K monitor daisy-chained off the primary over USB-C. There's no separate dock to source, connect to or eventually replace.

Because the configuration is identical at every desk, IT can deploy and support the setup the same way companywide, rather than troubleshooting a different dock and cable combination in every room.

The VG2758-2K's ergonomic stand empowered employees to adjust the setup to their ideal position so they could work for longer in greater comfort. Because of its intuitive design, the ergonomic stand also enabled monitors to be deployed faster.

What Results Has the Organization Seen?

The move was an opportunity to simplify rather than just relocate the old setup. Replacing the third-party dock with the monitor's built-in docking station has streamlined the workflow for both IT, which now manages one fewer component per desk, and employees, who connect with a single cable.

The standard two-monitor, single-cable setup is now deployed at every desk across the new corporate office, giving the organization a consistent, easy-to-support configuration instead of a patchwork of docks and cables accumulated over time.

Frequently Asked Questions

What Is a USB-C Docking Monitor, and Why Do Companies Use Them Instead of a Separate Dock?

A USB-C docking monitor has a docking station built into the monitor itself, so a single USB-C cable carries video, data and power between a laptop and the monitor. Companies use them to remove a separate docking station from the desk setup, which means one fewer component to buy, cable and eventually replace.

How Does Daisy Chain Connectivity Work for a Two-Monitor Desk Setup?

With daisy chain over USB-C, a secondary monitor connects through the primary monitor rather than running its own separate cable back to the laptop. This means that a two-monitor setup only needs one cable running to the user's laptop. USB ports on the second monitor work without needing an additional cable, something a DisplayPort daisy chain configuration can't do on its own.

Why Would a Company Moving to a New Office Change Its Standard Monitor Setup?

An office move is a natural point to reassess a standing hardware setup, especially when the existing configuration relies on components, like third-party docks, that add cost and complexity to every desk. Standardizing on a docking monitor at that point avoids simply recreating the same setup in a new location.

What Are the Benefits of Consolidating a Dock and Monitor Into One Device?

Consolidating a dock into the monitor reduces the number of components IT has to source, manage and replace at each desk, and it simplifies the connection for employees to a single cable. That tends to lower total cost of ownership compared with maintaining separate docks across an office.

How Many Monitors Can Be Part of a Single USB-C Daisy Chain Setup?

It depends on the specific monitors, cable configuration and laptop graphics card, but ViewSonic's docking monitors, including the VG2758-2K, support single-cable daisy chaining to a second monitor, making a standard two-monitor desk setup possible without any additional docking hardware.

Ready to Explore a Similar Solution?

Talk to a ViewSonic Field Solutions Engineer about how a USB-C docking monitor could simplify your own office's desktop setup, especially during a move or refresh.

ViewBoard 136-inch LDM136-151 All-in-One Direct View LED Display

SOLUTION BRIEF

How a Global Automotive Manufacturer Uses a 231” All-in-One dvLED Display to Power Plant-Floor Safety and Communication

What Challenge Was This Manufacturer Trying to Solve?

As part of a major investment to modernize one of its manufacturing facilities, this automotive manufacturer set out to build a new kind of on-floor safety and education station: a dedicated zone on the plant floor where new employees would be trained on safety protocols and all employees would stay current on policies and procedures.

Beyond compliance, the company wanted the space to reinforce a positive floor culture, with room to post recognition and motivational content alongside safety and production updates. The goal from the start was to build a model that could be replicated at other facilities across its manufacturing network.

Why Did an All-in-One dvLED Display Fit This Project?

The company had an existing relationship with ViewSonic across other display categories and brought that same partner in to help design the floor's centerpiece display. The organization needed a single, highly visible surface large enough to be read clearly from across a working manufacturing floor, and durable enough to hold up in a demanding industrial environment.

What ViewSonic Solution Did They Deploy?

The centerpiece of the new safety and education station is a ViewSonic^® LDM231-251, a 231" All-in-One Preconfigured Direct View LED display, housed in a custom-built rack positioned to tower above the floor's marked safety zone.

• The display delivers highly visible, frequently updated content: safety protocols, training material, production and quality updates, and recognition or motivational content for the floor.
• Its scale and placement mean the content is readable from across the working floor, not just up close, which is an achievement a smaller or standard commercial display couldn't match in the same environment.
• As an All-in-One dvLED display, the LDM231-251 integrates its cabinets, power, processing and mounting as a single system, simplifying what would otherwise be a far more complex install for a display of this size.

What Does the Deployment Look Like?

The display is mounted in a custom-built rack designed specifically to position it above the taped safety zone, so it's the first thing employees and visitors see when they enter the floor. That elevated placement, combined with the display's size, is what makes the content visible across a large, active manufacturing floor rather than only to people standing directly in front of it.

What Results Has the Company Seen?

Employees and visitors entering the floor now see the large dvLED display towering above the safety zone immediately, reinforcing that safety and quality information is front and center rather than buried on a bulletin board or a standard monitor. It gives floor managers a way to keep the whole team current on safety, quality and production status at a glance.

The same screen also gives floor leaders an easy way to share recognition and motivational content alongside safety and production updates, reinforcing the positive floor culture the company set out to build.

The station is being considered as a model to replicate at other facilities across the company's manufacturing network.

Frequently Asked Questions

What Is a Large-Format dvLED Display Used for on a Manufacturing Floor?

A large-format dvLED display on a manufacturing floor is typically used to broadcast safety protocols, training content, production and quality updates, and company communications where they're visible to the entire floor at once, rather than relying on smaller screens or printed boards that only reach people standing nearby.

How Big of a dvLED Display Works for a Factory Safety and Training Zone?

It depends on the size of the floor and viewing distance, but manufacturers building a dedicated safety and education zone often use large-format displays, such as ViewSonic's 231" LDM231, specifically so content stays readable from across an active floor rather than only up close.

What Makes an All-in-One dvLED Display Durable Enough for a Manufacturing Environment?

ViewSonic's All-in-One dvLED displays use protective-first design, including GOB (Glue-onBoard) surface treatment and IP and IK-rated protection, built to withstand dust, impact and heavy daily use in industrial and other high-traffic environments, not just controlled office settings.

Can One Large dvLED Display Serve Both Safety Training and General Company Communications?

Yes. Because a large-format All-in-One dvLED display can update its content instantly, the same screen can rotate between safety training material, real-time production or quality updates, and recognition or motivational content, without needing separate dedicated displays for each purpose.

Ready to Explore a Similar Solution?

Talk to a ViewSonic Solutions Engineer about how a large-format All-in-One dvLED display could anchor a safety, training or communication zone on your own manufacturing floor.

ViewBoard 136-inch LDM136-151 All-in-One Direct View LED Display

Joey Lee
JSL Marketing for ViewSonic [U.S.]
E: joey@jslcomm.com

Nury Lavandier
ViewSonic [Latin America]
E: Nury.Lavandier@viewsonic.com

Miranda Bravo
ViewSonic [U.S.]
E: miranda.bravo@viewsonic.com

CASE STUDY

Paraguayan Soccer Show Revamps Broadcast with ViewSonic ViewBoard Interactive Displays

COMPANY

Los Analistas del Fútbol de Primera is a long-running Paraguayan TV show that dives deep into the world of soccer. Aired live every Sunday at noon on C9N, the program features sports journalists, former soccer players, and even audience participation to analyze matches and keep viewers up-to-date on all things fútbol. This year, Los Analistas del Fútbol de Primera celebrated its 20th anniversary and was recognized as the Best Sports Over-the-Air TV Program at the Paraná Awards. C9N is a free-to-air channel known for its news programs.

“The ViewBoard IFP6550 display is a game-changer for Los Analistas del Fútbol de Primera. It’s allowed us to take our tactical match analysis to a whole new level with interactive graphics and real-time engagement with viewers. It’s a fantastic tool that’s truly transformed the way we present the beautiful game.”

— Marcelo Burgos, Sports Reporter, Los Analistas del Fútbol de Primera

THE CHALLENGE

Previously, Los Analistas del Fútbol de Primera relied on a static, third-party managed display for match analysis. This limited their ability to dynamically interact with graphics during the show. Reporters and guests were stuck using pre-loaded graphs, unable to make live modifications to explain plays in detail.

To address this limitation, the program sought a more versatile solution. Ideally, the new system would allow for real-time analysis of tactics discussed by the panelists, alongside the ability to engage with viewer comments live.

THE SOLUTION

The soccer show required a screen that offered greater interactivity. This meant analysts and guests could visually represent concepts by:

• Creating on-the-fly graphics: Examples, situations, and plays could be drawn live.
• Modifying player positions: Players could be added, removed, and repositioned on the field to illustrate strategies.

The ViewSonic^® ViewBoard^® IFP6550 interactive display became a game-changer. With the included myViewBoard^® software, reporters can now easily sketch tactics, strategies, and match analyses directly on the screen at the end of each program. This eliminates the previous limitations of static pre-loaded graphics and allows for dynamic interaction, deletion, and recapture of ideas.

Furthermore, the program’s interactivity extends beyond the on-screen graphics. Viewers can participate by sending live messages through Instagram, X and WhatsApp. These messages are displayed directly on the screen, allowing the hosts to read and respond live, creating a much more dynamic and engaging experience.

“The ViewSonic IFP6550 display is a game-changer for Los Analistas del Fútbol de Primera,” said Marcelo Burgos, a sports reporter for the program. “It’s allowed us to take our tactical match analysis to a whole new level with interactive graphics and real-time engagement with viewers. It’s a fantastic tool that’s truly transformed the way we present the beautiful game.”

RESULTS

The IFP6550 display breathed new life into Los Analistas del Fútbol de Primera. This interactive touchscreen display transformed the show into a dynamic and participatory experience. Viewers are no longer passive observers; they can now actively engage with the program.

Marcos Paredes, ViewSonic’s Territory Manager for Argentina, Uruguay, and Paraguay, expressed his satisfaction with the project. “We’re thrilled to have provided our IFP6550 Interactive Displays for Los Analistas del Fútbol de Primera,” he said. “At ViewSonic, we’re committed to delivering user-friendly solutions that empower our customers to achieve their goals.”

ViewBoard^® IFP6550 65" interactive display

myViewBoard software

CASE STUDY

Electrical Contractor Gains Updated Conference Space and Outstanding Clarity with ViewSonic^® 135-inch Direct View LED Display

COMPANY

Headquartered in Santa Fe Springs, California, CSI Electrical Contractors has been a leader in highly technical and innovative electrical design and construction since 1990. Their team of consultants, engineers, project managers, tradespeople, and professionals deliver the best solutions to customers’ greatest electrical engineering and construction needs. With the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge in aerospace, education, healthcare, biotech, pharmaceutical, entertainment, hospitality, manufacturing, retail, and more, CSI services include electrical construction, technology solutions, and alternative energy, where CSI is regarded as a premier provider of energy development, installation, and maintenance.

“Given the type of work we do, detail is critical. The ViewSonic Direct View LED display delivers the crystal-clear images our engineers need to showcase project plans and spreadsheets to customers. The brightness and color are also outstanding. We haven’t heard anything negative about the screen. Everything they throw at it presents well.”

— Guy Coria, CSI Director of IT

THE CHALLENGE

The CSI Solar Group conference room had been causing headaches for years. Along with an aging projector system, the original installed equipment never quite worked as intended. More than one AV company failed to find a solution, and the patience (and money) to chase a fix ran out. Things changed when the company began working with larger customers on bigger projects.

“Our business in Solar took off, and we began getting bigger projects and more customers,” said David Pelayo, CSI director of HR and technology. “The budget for this division increased, and our new AV partner Avidex finally figured out the problem.”

At that point, said Pelayo, the team decided to change up the technology entirely. With a bigger budget to work with, and huge solar farm companies looking to partner with them, the decision was made to install a large LED screen as the room’s visual focal point.

“We wanted to create a conference room that reflected the size and scope of the business,” said Pelayo. “Avidex presented us with options and LED displays in the 86-inch to 98-inch size range were the sweet spot in terms of price.”

THE SOLUTION

Among the brands under consideration, the team gravitated toward the ViewSonic^® CDE9830 98-inch commercial display. Not only did it offer everything needed to easily support content sharing and collaboration, they were familiar with the brand.

“We began purchasing ViewSonic monitors for our employees about two years ago,” said Guy Coria, CSI director of IT. “The price of our existing brand had gone up, and the quality had declined. The other brand we looked at didn’t perform to our standards. The ViewSonic desktop monitors did.”

Employees have been very satisfied with the ViewSonic monitors, said Coria, adding that feedback on the color and clarity had been particularly positive.

“Because we knew ViewSonic is a great brand in terms of quality, performance and price, we reached out to them to look at their large conference room displays,” said Ruben Estrada, CSI network administrator. “When we got to the ViewSonic showroom and saw the Direct View LED display, we all fell in love with it and didn’t want to consider anything else.”

It wasn’t just bigger, added Pelayo, the ViewSonic 135” Direct View LED display was ideal for creating a high-impact space for the Solar Group to hold its most important customer meetings. It further provided an all-in-one solution with easier front-of-screen maintenance, along with outstanding color and detail.

RESULTS

At over a year since the ViewSonic Direct View LED display was installed, the team has heard nothing but positive feedback from the Solar Group users.

“Given the type of work we do, detail is critical. The ViewSonic Direct View LED display delivers the crystal-clear images our engineers need to showcase project plans and spreadsheets to customers,” said Coria. “The brightness and color are also outstanding. We haven’t heard anything negative about the screen. Everything they throw at it presents well.”

As is typical with AV installations, there were a few bumps along the way. A few parts were delayed, pushing back the initial timeframe; a panel was installed upside down; and the color matrix required adjusting.

“We’re very meticulous, and we asked to have the color coordination adjusted,” said Pelayo. “The ViewSonic tech team came in and dialed it in really well. They were terrific to work with.”

All in all, the installation process went smoothly, the team agreed, including righting the upside-down panel.

“We used the vacuum tool to remove and re-insert panels,” said Pelayo. “We were nervous at first about damaging them, but they’re actually very durable and resilient. It was easy to do.”

Looking back over the experience, the CSI technical and IT team concluded that ViewSonic lived up to its brand reputation, both in product quality and customer experience.

“Our ViewSonic rep, Steve Rodriguez, is a great guy and worked with us closely to ensure that our needs were met,” said Pelayo. “Whether it’s desktop monitors or big-screen conference room displays, the ViewSonic products we’ve tested and used are top-notch.”

ViewBoard^® IFP7550 interactive displays

CASE STUDY

Team Honda Enhances Supercross Performance Review and Brand Impact with ViewSonic Displays

COMPANY

Honda Powersports is an American Honda Motor Company brand and the sole distributor of Honda motorcycles, scooters, ATVs, and Side-by-Sides in the United States. The Honda Power Sports & Products business unit conducts the sales, marketing, and operational activities for these products through independent authorized Honda retail dealers. Formed in 1982, Honda Racing Corporation (HRC) is a racing division of the Honda Motor Company and is responsible for Honda’s motorcycle racing activities, including AMA Supercross motorcycle racing. Honda Racing Corporation encompasses both the management of motorcycle and teams throughout the world and the development of racing motorcycles.

“It was a big improvement over what we were doing in the past, which was a simple fabric banner. The ViewSonic display was much more attention-grabbing. At every event people would go up to it and see what it’s all about.”

— Jose Monge Jr, Red Rider Program Coordinator for American Honda Motor Co.

THE CHALLENGE

A newer version of motocross (MX), Supercross (SX) brings dirt bike racing indoors, delivering high-energy stadium events with an easy view of the action. Seven manufacturers currently create the motorcycles that compete in the American Motorcyclist Association (AMA) Supercross Championship, which consists of 17 rounds held in venues across the U.S. and Canada. At each event, brands vie for attention from fans in sold-out stadiums. Each motorcycle maker sponsors a team, and the riders themselves are one of the biggest marketing platforms.

To further showcase the Honda Racing Corporation (HRC) and the Honda Motorsports brand, Team Honda highlights its pit and riders with retractable fabric banners in the arena. Recently, a fan with insight into digital signage proposed an enhancement, while also suggesting an improvement to the team’s performance review system.

“We bring a team trailer truck to the events and after warm ups, qualifiers, and races the coaches sit with the riders and review their performance,” said Red Rider Program Coordinator for American Honda Motor Co. Jose Monge Jr. “It’s just like any premier-level sport, like football players going over their plays.”

To enable this rapid, on-site review, Team Honda staff haul monitors and video equipment to each event. The quality of those monitors, they were to discover, could make a notable difference.

THE SOLUTION

An unexpected encounter introduced Team Honda to new ways to improve both their on-site messaging and digital performance reviews.

Many Supercross fans like to enhance race day with a pit pass, which allows them to mingle with riders, mechanics, and motorcycles, and experience the energy that surrounds Supercross competition. This was where Monge and his team met Jeff Volpe, President of ViewSonic Americas.

“He saw the monitors we were using to review practice rounds and introduced himself,” said Monge. “He told us, ‘I’m in the monitor business and our monitors can do a better job for you than what you’re using now.’”

Volpe recommended the ViewSonic ELITE™ XG320Q 32-inch gaming monitor, which delivers ultra-smooth images, rapid response time, and a wide color gamut ideal for viewing the intricacies of fast-paced Supercross rides.

Next, Volpe suggested that Team Honda try a rolling promotion to draw attention to both companies’ brands, using two ViewSonic CDE5010 displays housed in weather-proof rolling cases.

Jeff is a terrific Supercross fan,” said Monge. “He’s enthusiastic about Honda racing and we were thrilled to implement his ideas.”

THE RESULTS

The 2023 AMA Supercross Championship series began on January 7th at the Angel Stadium of Anaheim. Among the excitement and hype, the HRC riders and Team Honda support staff spent many more serious moments reviewing warm ups on the new ViewSonic monitors. Later, between the qualifiers and heats, the performance reviews became even more critical. The visuals, said Monge, were noticeably better. 

“Right away it was clear from looking at them that these are premium monitors,” said Monge. “The images are very crisp and clear; it also helps for us that they’re lighter weight, since we move them around a lot.”

The vibrant 50-inch displays in their rolling cases paired perfectly with the energy-filled scene. A video loop ran an alternating series of Honda Powersports and ViewSonic messaging, along with a QR code linking to the “ViewSonic-Honda Gear Up Giveaway” prize lottery.

“It was a big improvement over what we were doing in the past, which was a simple fabric banner,” said Monge. “The ViewSonic display was much more attention-grabbing. At every event people would go up to it and see what it’s all about.”

The display accompanied Monge and the HRC team to each of the 17 Supercross rounds that year, running for upwards of eight hours each day. The displays and cases held up beautifully, said Monge, even in the occasional rainy weather they encountered.

The season wrapped up on Saturday, May 13th at the Salt Lake City Rice-Eccles Stadium, with Team Honda rider Chase Sexton taking the number one spot, giving Honda its first Supercross Championship in 20 years. A coincidence perhaps, but the crystal-clear performance reviews and added audience hype brought by the ViewSonic displays couldn’t have hurt.

ViewSonic CDE5010

ViewSonic ELITE™ XG320Q

CASE STUDY

Splitsville Delivers a 21st Century Entertainment Experience Using ViewSonic® Large Format Displays and Projectors

PROFILE

Splitsville Entertainment is an expanding Canadian chain of bowling and entertainment centers that provide an innovative, immersive experience for patrons. The Splitsville concept was created in 2006 with a mission to transform bowling into an engaging entertainment-focused experience that would attract the interest of a younger, tech-savvy customer base. The strategy was to acquire, update, and manage bowling venues that had fallen out of favor with the public. Since its inception, Splitsville has opened four locations in Ontario and British Columbia, making it the largest chain of bowling and entertainment centers in Canada. A cornerstone of the revamped entertainment concept has been Splitsville’s significant investment in high-end display and HD projection technologies from ViewSonic.

“ViewSonic digital signage, projection systems, and large format displays are now front and center in every area of every Splitsville facility, serving up music, sports, event reminders and acknowledgements, celebratory notices, advertising, and business presentations.”

— Pat Haggerty, President Splitsville Entertainment Group

THE CHALLENGE

The bowling landscape in Canada has undergone significant changes over the years. During that time, it’s lost its appeal for many sectors of the population.

Many people have images of bowling alleys as throwbacks to a decades-old past, says Pat Haggerty, president, Splitsville Entertainment Center. “The typical impression was a place characterized by smelly shoes, unpleasant noise, and ugly shirts.”

Revenues have taken a hit. From the 1960s to the 1980s, bowling revenues came from four areas: corporate teams, birthday parties, open playing, and leagues. During that period, up to 85% of bowling lane revenue was generated from bowling leagues. With the societal shift to home entertainment, the number of registered bowling leagues has dropped dramatically.

“Once entertainment technology came on the scene, leagues shrunk to one-tenth of their original size and technology started to come into play,” Haggerty says.

Shifting demographics have also played their part. As millennials surpass baby boomers in numbers, interest in bowling as a source of entertainment has declined. For Splitsville, that was a wakeup call, Haggerty says. “Millennials carry the money and are much more tech-savvy. We knew that with that shift, bowling had to do something completely different to survive.”

To attract an entirely new generation, Haggerty says they needed to create an attention-grabbing digital and immersive experience. “The question we needed to answer was: How can we communicate to this large group of consumers and turn bowling into an entertainment experience?”

THE SOLUTION

In 2006, Splitsville embarked on a mission to shatter stereotypes and attract a new generation of bowlers to the scene. This major renovation project included leveraging the latest and greatest display technology to create a multi-faceted entertainment experience. The goal was to create an audio-visual extravaganza throughout each facility, from the bowling lanes to the lounges and party rooms.

To accomplish this, Splitsville invested more than $1 million into each installation project. A key factor in the decision to purchase commercial grade displays was the desire to ensure top picture quality and a longer life.

The ultimate solution included ViewSonic product in the following areas:

• Bowling lanes - Each bowling center features from 16 to 34 bowling lanes. These lanes are divided into zones of six, each of which was outfitted with 10 X 12 foot ViewSonic CDE series (commercial grade) drop-down displays that can be programmed to play different content and music. When not in use, the displays can be raised behind a masking unit via a remote control switch at the front desk.
• Each site was also equipped with a suspended ViewSonic Full HD LED projector system for the walls behind the lane displays. These can be used to create a wallpaper effect showcasing Splitsville branding, or configured to present multiple image panes and messaging tailored for the audienceand/or time of day.
• Party Rooms - LED projector systems were installed in each party room, all of which are connected to the main system and can access the satellite network via HDMI cable or cellular port.
• Bars - The Splitsville bars were adorned with a video wall comprised of multiple 32” to 48” ViewSonic CDE series commercial-grade displays (11 to 14 units depending on the size of the location). Up to three satellite dishes provide customized visual and audio content to the various displays. Screens are connected to the satellite dish or the Bowling Music Network, which runs commercials every 15 minutes.

Additional display synchronization technology was deployed at the Hamilton location to enable increased selection of splitting options based on 16 to 20 inputs. These can be loaded at the head office, which, Haggerty explained enables them to dictate what they want to feed into those lanes at any time.

THE RESULTS

Since its technological evolution, Splitsville has delivered on its promise to bring a state-of-the-art bowling entertainment experience to a new generation of customers.

"ViewSonic digital signage, projection systems, and large format displays are now front and center in every area of every Splitsville facility, serving up music, sports, event reminders and acknowledgements, celebratory notices, advertising, and business presentations," said Haggerty.

“The instant gratification of digital has been a big tool for getting people out,” said Haggerty. “Also, adding more visual richness to our ads has moved people to buy more food, more quickly.”

The first location to undergo an overhaul quadrupled its earnings within two-and-a-half years, said Haggerty. “It took about eight months for it to get its sea legs, but after that, everything came together.”

The sites have become a popular draw for activities outside of bowling, from party bookings to business meetings. “People can even do PowerPoint presentations over the lanes if they like. With one push of the button they can have all screens showing the same input,” said Haggerty.

Plans are in the works to add interactive touchscreen capabilities to displays at the individual bowling lanes to enable sign up, scorekeeping, points collection, and messaging.

Now armed with a proven concept with definitive results, Haggerty has his eyes on expansion into the U.S.

ViewSonic CDE Series Commercial Displays

CASE STUDY

ViewSonic^® Delivers Seamless, High-Impact Video Wall Solution for Exclusive Business Center in Costa Rica.

PROFILE

Suministros Comerciales y Tecnológicos S.A. (Sucotec) is a company in Costa Rica with over nine years of experience on the domestic market. With a group of highly specialized professionals providing tailored IT services, Sucotec S.A. helps increase the competitiveness of its customers, with scalability to manage future growth. Sucotec S.A. primarily provides businesses in Costa Rica with a wide range of simple, highly flexible, in-demand video wall systems. One of Sucotec’s customers is GBT Technologies, a company that offers high technology software solutions to customers of a variety of industries, including the financial, banking and stock market sectors. GBT Technologies is located in the San José Business Center in Escazú, a high-growth business hub in San Jose where a great number of service industry companies are located.

“Many factors motivated our decision to choose the ViewSonic displays – the quality of the equipment, the warranty, the cost, and the support provided during the decision-making process.”

— Salomón Ocón, GBT Technologies Director of Operations

THE CHALLENGE

For any digital signage solution provider, installing a video wall is always a challenge. For Sucotec S.A, not only did they require perfectly aligned displays, but they also needed to provide equipment that met the expectations of their customers, GBT Technologies.

According to Salomón Ocón, operations director of GBT Technologies, they wanted to invest in a video wall solution that would push effective communication and teamwork throughout the company.

“In our business, since most of our customers are in the financial market, we needed a visual tool capable of managing two main areas: software development and stock market indicator monitoring.

“Our developers needed a video wall for displaying programming jobs in an agile and simultaneous way. The rest of our staff wanted the video wall to display reference information about stock markets around the world. For these reasons, the video wall was installed in the lobby where everyone could see the different messages,” explained Ocón. “Obviously, the quality of the images should be flawless, and the edge of the displays should also be thin enough to make sure we have a better general view.”

To achieve this, Sucotec S.A. suggested to GBT Technologies the use of 12 ViewSonic CDE4803 commercial displays that, in addition to features like high brightness, wide viewing angles and narrow bezels, come with value added features, as highlighted by Ocón.

THE SOLUTION

“Many factors motivated our decision to choose the ViewSonic displays – the quality of the equipment, the warranty, the cost, and the support provided during the decision-making process,” said Ocón.

Fernando Ramírez, Sucotec S.A. representative added, “We were always sure that the ViewSonic displays would be the most suitable for this video wall, given the requirements of big screen size, image quality, and symmetric alignment of the displays.”

The representatives of both companies highlighted a very successful purchasing and installation experience, not only due to the quality of the equipment, but also the support provided by ViewSonic and its wholesale distributor.

THE RESULTS

“How has the installation of this video wall impacted our offices? I can say that it has improved the productivity of our daily activities. It provides better guidance to our staff for very specific software programming processes by sharing and displaying projects in a fast and efficient manner,” said Ocón.

In addition, there are no complaints related to the quality of the equipment provided. 

ViewSonic 75-inch IFP7550