What is tilling mode for Videowall and how to set it correctly?

<Tiling Mode> In Tile Mode you can view an image in a larger scale by connecting multiple monitors.   After all the displays are installed properly to a video wall, you need set the position of each display to determine how to display the input image. Once the position is set, the video source (e.g. computer) identifies the number of connect...

How to wake up IFP7560 from Sleep mode when connected to notebook?

There are some suggestions:   1.If IFP is under Sleep mode, please re-plug HDMI cable.   2.If IFP is on, turn windows to Hibernation (S4) mode, then IFP to Sleep mode. Wake up notebook then IFP will be awaken.

How to disable the internal speaker and output volume from the line out for CDE5510, CDE6510, CDE5010?

You can set the volume to 0 (to disable internal speaker volume) and set the Audio out (Line out) volume.       The volume of the Audio out (Line out) is suggested to control by an external sound bar for higher output.  

How to Add a New Projector to vRemote?

The vRemote app allows users to control the projector via their personal mobile device. Users can control input source, mute/unmute, power on/off, go to Home page, and so on of the projector.  1.Please Open “vRemote Installation” in AppCenter of the projector and see the instruction to set up connection between vRemote App and the projector....

Is XG2401/XG2402/XG2701/XG3202-C compatible with the resolution 1920x1080@144Hz connected in HDMI?

  ViewSonic XG2401/XG2402/XG2701/XG3202-C can support the resolution 1920x1080@144Hz in HDMI.   However, to enable 1920x1080@144Hz, there'll be some requirements except for the monitor.   1. Graphics card/Laptop: Must support HDMI 1.4 output with 340MHz pixel clock or HDMI 2.0 output capability.   2. HDMI cable: It's suggested to connect...

What is the function of power indicator in OSD menu on my monitor?

This is an indicator about power consumption ratio which is affected by some OSD settings change, ex. ECO mode and Brightness. Here's a matrix table about ECO mode and power consumption ratio. ECO mode Power consumption ratio Standard 100% Optimize 85% Conserve 70%

What to do when a black border coming on the image?

If the image doesn’t fit the screen, please do the following:   1.Check the applied resolution to make sure that they match the settings recommended in the user guide.     To check the resolution in Windows:     (1)Settings > Display > Click on the display that user wants to change the setting         (2)Change the display resolution for ...

How to set a Monitor Webcam as the Primary Camera on macOS?

1. Connect the USB cable to the monitors USB Type B port on the back of the monitor and attach the other end of the cable to an available USB port on the computer. Allow 10-15 seconds for the computer to recognize the external webcam. Please do remember to connect the video signal cable between monitor and computer.   NOTE: This method will ...

Why sharpness setting in OSD menu is grey out on my XG2702 and VA2719-2K-SMHD?

When resolution is set in native resolution (1:1), both Sharpness and Overscan option in OSD will be grey out.

How to install the base on VX2476/VX2776/VX3276 series monitors?

You can refer to this video. 1. Lay the monitor unit face down on a flat surface, using the soft bag received or a soft material to avoid damaging the screen. 2. Insert and align the Neck of the stand (Do NOT attach the base to the neck) into the stand slot on the display. 3. Firmly push the neck into the slot while securing t...