How to do color calibration with my monitor?

Please refer to this FAQ, find "Calibrate your display" section and follow the instruction.

What to do if there is vertical or horizontal line on my monitor?

1.If the line location is not fixed, please check and adjust firstly by following below methods:   (1) Check the video cables and/or another video input. Make sure the cable is securely connected and if possible, change the cable.   (2) Use another power outlet.   (3) Connect the monitor to another computer.   2. If the line location is...

How to manually install LED monitor drivers under Win10 64-bits?

If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...

How to change refresh rate in windows 10?

Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE

How to set landscape and portrait Mode?

Several ViewSonic LCD panels support both Landscape and Portrait modes.  If your LCD panel supports this feature, you can switch modes by turning the screen as shown in the diagram below. To change the image on the Windows Desktop, follow instructions below: Open the Start menu and click "Control Panel." Click "Adjust Screen Resolution"...

What to do if the monitor shows “Out of range”?

This occurs when the screen resolution is set higher than what the monitor can support. Please adjust to the corresponding resolution.   Step1: Enter Windows safe mode           Please refer to Start your PC in safe mode and follow the section “From a black or blank screen”. Step 2: Change your screen resolution          1. Cli...

Why Auto Image Adjust function is gray out in monitor OSD?

When using a monitor in the digital (HDMI, DisplayPort) connection, Auto Image Adjust and Manual Image Adjust settings may be disabled. This is normal as the monitor will adjust itself when in the digital mode.

What to do if there is no sound from the monitor’s speakers when connected to a PC/laptop?

1. Ensure that your monitor has built-in speakers. You can check it on Product's website page -> Specification -> Audio.   2. Check the cable connection: a. Make sure the connection is secured.  b. Re-plug or try another HDMI (Premium) certificated cable in direct connection. c. If using a VGA cable, ensure the audio cable is connected to ...

How to setup dual monitors on a computer?

Dual monitor setup is simple to configure on modern computers. Windows will automatically detect and configure the displays. Requirement:   1. Windows 7 or later. 2. A PC or laptop with at least 2 video out ports.  3. 2 monitors.   After connected 2 monitors to 2 video out ports, Windows will automatically load the drivers and present a...

Where to find serial number of the monitor?

The serial number can usually be found on the back or bottom of your product and is either 10 or 12 digits long. The serial number can also be found on the original box of the unit.

Contactează-ne

Contactează-ne direct dacă nu poți obține răspunsurile și soluțiile pentru produsele tale ViewSonic.