No, CDE7061T VGA Out only bypass the signal from VGA in 1 and VGA in 2, the annotation won’t be shown on second display.
You can set color temperature to Cold or drag the dot to right to adjust in Display setting. Please note when you set color temperature to Cold or drag the dot to right to adjust, the blue light also increase.
Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...
Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP70. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70. You can press remote control buttons : INPUT 0 2 1 4 quickly in sequence to restore the password to default.
1.Please turn on player’s HDMI CEC function. 2.Connect IFP and player in HDMI cable. 3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP. When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is turned on. <Note> Not all HDMI ports on IFP suppo...
1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly 3. If you connect from PC, please make sure the com port is correctly chosen. 4. It's recommended to vController to control the Viewboard by RS232. Please r...
USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...
See below the list of compatibale Wifi dongles for the IFP series. Models Supported Wi-Fi dongle IFP4320 VSB050 LB-WIFI-001 IFP30 VSB050 LB-WIFI-001 IFP32 / IFP32-2 VSB050 VB-WIFI-002 VB-WIFI-004 TP Link TL-WN725N IFP33 VSB050 VB-WIFI-...
Issue: When I connect an HDMI input source to my IFP and then connect an external monitor via HDMI out, the external monitor only displays the IFP's Android interface instead of the HDMI input source. Solution: To resolve this issue, follow these steps: Using your IFP's remote control, press the Input button and then press 991 to acc...
Contact Us