You can disable the “Touch and Annotate from Mobile” function in setting.
1. S/PDIF: When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed. With this connection, both built-in and external speakers will output audio. You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. . Please refer either method below: You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the font panel but...
The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with internet connection.
Black image means that the specific video format isn't supported by Chromium. You can play such videos by integrated Browser in Embedded Player.
Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...
No, CDE7061T VGA Out only bypass the signal from VGA in 1 and VGA in 2, the annotation won’t be shown on second display.
IFP7550 USB port 3.0 supports external HDD up to 4TB. Below models had pass the read/write test. WD: WDBUY0040BBK(4TB) SEAGATS: STDR2000301(2TB) TOSHIBA: HDTC810YR3AA(1TB) SONY: HD-E1(1TB)
It's a software limitation from MacOS. Please upgrade MacOS to v10.13 or later to solve the issue.
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the menu and inpu...