Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1) ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643
IFP7550 USB port 3.0 supports external HDD up to 4TB. Below models had pass the read/write test. WD: WDBUY0040BBK(4TB) SEAGATS: STDR2000301(2TB) TOSHIBA: HDTC810YR3AA(1TB) SONY: HD-E1(1TB)
To disable Airplay Service in vCast do the following： Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service To enable Airplay follow steps 1-3 and check Airplay Service
If touch fails across all input sources, you can perform a system initialization using the [INIT TV] command in the Debug Menu. Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Execute Initialization: Locate and select [INIT TV] from the pop-up menu. System Restart: The dev...
You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController. <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.
Please configure the networks firewall settings to grant pass-through authentication to IFP7550.
vBoard will be activated automatically while Internet in connected. Please make sure your IFP display is well connected to Internet.
ViewBoard Cast supports Microsoft Windows, MacOS, iOS and Android/Chrome based Devices.
You can set color temperature to Cold or drag the dot to right to adjust in Display setting. Please note when you set color temperature to Cold or drag the dot to right to adjust, the blue light also increase.
Yes, IFP7550 integrated a HDMI output port which is capable of being installed by Daisy Chain. For more details, please refer to the User Guide.
Contact Us