1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer below steps to unlock: 1. Prepare a FAT32 formatted USB drive. 2. Unzip Unlock.zip attached and copy to the USB drive root directory. 3. Insert the USB to I...
Please find the instructions and requirements in the attached PDF. File URL:https://support.viewsonic.com/helpdesk/attachments/33039346408
Please visit product page of IFP7550 in our website and check the section of "RELATED ACCESSORIES" list for details.
You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController. <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.
The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with internet connection.
To disable Airplay Service in vCast do the following： Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service To enable Airplay follow steps 1-3 and check Airplay Service
IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input. Supported input sources: 1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.
Touch lag on the native Android system is often caused by high RAM usage. Clearing background apps or using the built-in cleaning tool can restore responsiveness. Steps: One-Tap Memory Clear: Tap the [Sidebar Menu] on either side of the screen. Select the [Task Manager / Recent Apps] icon. Tap [Clear All] to release background ...
vBoard will be activated automatically while Internet in connected. Please make sure your IFP display is well connected to Internet.
The resolution of IFP7550 OSD menu is 1080P.