Product Cut in S/N EP5520T phase-in from UVE173100001 EP5520 phase-in from T91173300001
Here’re major steps to set up video wall in portrait position for your reference. 1. Set up monitor ID in OSD menu as 1~4 prior to mounting monitors. 2. Connect IR sensor cable to monitor 1. 3. Connect the PC to monitor 1 with DP cable firstly for easy setup & adjustment afterwards. 4. Mounting monitor 1/2/3/4 in portrait p...
You can refer below steps to check the issue. 1. To reset the NMP-302w. 2. To replace the HDMI(extension) cable. If above steps can't solve the issue, it will be NMP-302w mainboard issue, you need to replace NMP-302w.
NMP-302w and NMP580-W support EP5520T touch function, you can use these two models with EP5520T, then you will have touch function.
1. Overview The "Android Boot Animation" is a script used to load PNG files when the device boots. It is contained within an uncompressed zip file called bootanimation.zip. 2. Inside the bootanimation.zip file The bootanimation.zip file contains: The image folder(s) (containing PNG images named by incremental numbers) The desc...
1. Download the attached license file. 2. Select the correct Time Zone. 3. Please follow the below procedures to install the Signage Manager license: license URL:https://support.viewsonic.com/helpdesk/attachments/33040907670
Upgrade under the factory menu Copy MstarUpgrade.bin in USB and Insert U disk to the USB port Press Input menu and then press 2 5 8 0 to activate factory menu (Fig. 1) Move to “Upgrade Main” item and press OK button to confirm. (Fig. 2) Select “Confirm” to confirm the upgrade (Fig. 3), the system will automatically reboot and start the up...
Download ADB from https://developer.android.com/studio/command-line/adb.html 1. Run cmd commend and go to the adb save folder that connect to device via Adb over TCP, if use Adb wire, skip this step adb connect {ip} for example: adb connect 192.168.2.112 2. Take screenshot and save to device adb shell screencap -p /sdcard/...
While editing content with Signage Manager, it will compress and save photo in lower quality. Please follow below procedures to replace the photo. 1. After finishing editing in Signage Manager, choosing “Export to USB”. 2. Open “File Explorer” and locate USB drive in SMIL/media folder. 3. Copy original photos to this folder and...
There are two methods to get back to the dashboard. 1. Press up button on the remote control to go to the dashboard 2. Connected to a mouse, directly press and hold anyone of the corner area, after successfully triggering the countdown, the corner area will flash in reverse (as shown in the figure). It will exit after ten seconds.