Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE
If the image doesn’t fit the screen, please do the following: 1.Check the applied resolution to make sure that they match the settings recommended in the user guide. To check the resolution in Windows: (1)Settings > Display > Click on the display that user wants to change the setting (2)Change the display resolution for ...
Please refer to this FAQ section 1 and set to recommended display resolution.
The serial number can usually be found on the back or bottom of your product and is either 10 or 12 digits long. The serial number can also be found on the original box of the unit.
In normal operating conditions, there might be normal electric current sound came monitor which should not impact on your usage. If this did not occur in the past but appeared recently, please contact ViewSonic service center.
These models are optical touch monitors which use two CMOS cameras (optical sensors) placed in the corners at the top of the screen as well as three reflectors (light strips). These cameras are used to look across the entire touch surface for touch events. When an object touches the screen, it blocks some of the light being received by the se...
General Precautions Make sure the monitor is turned off and the power cable is unplugged from the power outlet. Never spray or pour any liquid directly onto the screen or case. Doing so could damage your monitor. Dust or hard materials may scratch the screen. Please make sure the cleaning cloth is free of any debris. Clean and dry the m...
Several ViewSonic LCD panels support both Landscape and Portrait modes. If your LCD panel supports this feature, you can switch modes by turning the screen as shown in the diagram below. To change the image on the Windows Desktop, follow instructions below: Open the Start menu and click "Control Panel." Click "Adjust Screen Resolution"...
If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...
Dual monitor setup is simple to configure on modern computers. Windows will automatically detect and configure the displays. Requirement: 1. Windows 7 or later. 2. A PC or laptop with at least 2 video out ports. 3. 2 monitors. After connected 2 monitors to 2 video out ports, Windows will automatically load the drivers and present a...