How to upgrade the firmware on Stand type EPoster, EP5520/EP5520T, EP5540/EP5540T, EP5542/EP5542T?

1. Format the USB disk as FAT32.

2. Unzip the “” and then copy the .bin file to the USB disk (FAT32) in the root directory.

3. In Android mode, press the Source menu button, then press INPUT 9 9 1 to open the Service Menu.

4. Select "Firmware Update" and press OK. 

5. Select "Upgrade Main" and press OK.


6. Select "Confirm" to confirm the upgrade. The system will automatically reboot and start the upgrade. The Poster will automatically restart once it is finished.


  • Please DO NOT POWER OFF while the F/W is upgrading. It will damage the main board permanently.
  • You will have to re-install your vSignage license.

Last modified: 2021 Oct

Contact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.