How to prevent from annotate on ViewBoard Cast by mobile devices?

You can disable the “Touch and Annotate from Mobile” function in setting.

Where can I get more info for suitable slot-in PC with IFP7550?

Please visit product page of IFP7550 in our website and check the section of "RELATED ACCESSORIES" list for details.

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please turn on HDMI CEC function in “Input Setting” on IFP. <Note> Not all HDMI ports on IFP support CEC, please check UG to identify which port(s) support(s)

How do I disable the Embedded Player in IFP7550/IFP5550/IFP6550/IFP8650?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70   Please follow below instructions to disable the Embedded Player.   Press INPUT 9 9 1 in sequence on the remote to enter the Debug M...

What to do if an error message "No signal" appears on my IFP while connecting to an external device?

Please check IFP/device/cable:   1.Check settings on IFP. a. Please check and make sure the correct input source is selected. b. Try different HDMI port on IFP.   2.Please check setting on laptop/PC.    If a Windows-based notebook is connected, press "Windows Key + P" and make sure the Project       settings is either on Duplicate or Ext...

Can I install IFP7550 by Daisy Chain?

Yes, IFP7550 integrated a HDMI output port which is capable of being installed by Daisy Chain. For more details, please refer to the User Guide.

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.

How to activate the preinstalled Windows 10 trial in VPC10/VPC14?

1. Purchase the product key online or via Microsoft distributor. 2. Once you have the key, click “Start > Settings > Update & security > Activation > Change the product key”, then enter the new product key then click Next to Activate.

How to disable ECO Mode on IFP XX50-2?

1. Enter the Android Settings menu (use the settings button on the unit or press Menu on the remote); if you use the setting button on the unit you will need to click the icon below: 2. Then select Other Settings. 3. Select On or Off.

What to do if ViewBoard 2.1 shows “Trial” status?

ViewBoard 2.1 will automatically be activated when PC/laptop connects to IFP50/70 with an USB touch cable or please purchase a key to get it activated permanently.