Please manually set Date/Time to select correct time zone.
Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the menu and inpu...
Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70 Please use remote control to enter debug menu via pressing INPUT 9 9 1 in sequence, then go to Other Setting--àUSB Disk Enable a...
Please check IFP/device/cable: 1.Check settings on IFP. a. Please check and make sure the correct input source is selected. b. Try different HDMI port on IFP. 2.Please check setting on laptop/PC. If a Windows-based notebook is connected, press "Windows Key + P" and make sure the Project settings is either on Duplicate or Ext...
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the touch fun...
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP70. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70. You can press remote control buttons : INPUT 0 2 1 4 quickly in sequence to restore the password to default.
According to USB 2.0 SPEC, the maximum USB cable length is 5 meters and that’s why we provide one 5 meters USB cable along with IFP display. If you need a USB cable longer than 5 meters, please use self-powered USB hubs or active (repeater) cables.
To disable Airplay Service in vCast do the following: Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service To enable Airplay follow steps 1-3 and check Airplay Service