What to do when there is no display on my monitor?

Check the power LED first. If the LED is on but there's no image, the issue is likely related to the input signal or cable connection rather than power. Troubleshooting Steps: 1. Check the Power LED Status LED is OFF: Ensure the power cable is firmly seated and the physical power switch (if available) is turned on. Try a different wall out...

Why my MacBook with MacOS v10.11 can't get touch feedback from IFP7550?

It's a software limitation from MacOS. Please upgrade MacOS to v10.13 or later to solve the issue.

What to do when: "Machine Code: 667406643860" shows up on my Viewboard after a reset?

This happens because vCast requires a license key to activate. Please ensure your Viewboard is connected to the internet to get “Registration OK” to show on screen to work.

How can I adjust color temperature on IFP?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**30, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**30, IFP**70     Due to Android limitation, color temperature is only adjustable in other source(HDMI/PC, etc), not in Embd player...

How can I lock the front panel buttons on IFP5550/IFP6550/ IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. . Please refer either method below:   You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the font panel but...

What to do if "No Signal" appears on the ViewBoard while connecting an external device (HDMI, USB-C, or PC)?

Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.

How do I connect external speaker(s) to my projector?

1.Wired connection:   1.1 via 3.5mm audio out:       If the projector is equipped with a 3.5 mm audio out mini jack, usually it is  green and marked as          Audio Out. Please connect a 3.5 mm audio cable between speaker and projector for audio output        purpose.     1.2 via S/PDIF:        If the model is equipped with S/PDIF por...

Why the image is pixelated from my projector?

Usually this is related to unmatched output resolution setting and content.  For example, setting 720P resolution output to a 4K projector or playing a 720P video on a 4K projector in full screen would cause pixelated.   Please make sure to set recommended resolution by referring to this FAQ.

How to change refresh rate in windows 10?

Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE