Do the VP2468’s USB ports support Apple device power charging?

The 4 USB ports support 5V 900mA Apple device power charging. The fourth downstream USB port can support device charging while the display is on “standby mode”, but all other ports will only charge devices while the display is “on”. As of Dec. 11 2020, VP models support standby model with charging function via 2.1A USB port of monito...

Why can’t my monitor automatically detect a source?

The "Auto Detect" feature is disabled by default on many models. You must manually enable it within the OSD menu to allow the monitor to switch between active ports automatically. Step-by-Step Instructions: Press the physical button to call up the OSD Main Menu. Navigate to the [Input Select] section. Locate [Auto Detect] at the bo...

Why is the auto-pivot function not able to detect my monitor’s orientation?

Auto-Pivot requires DDC/CI enabled, OSD Pivot set to Auto, and the dedicated software running in the background. Troubleshooting Steps: Configure Monitor OSD Settings: Open the [Setup Menu]. Ensure [DDC/CI] is toggled to [On]. Set [OSD Pivot] to [Auto].                     Enable Control Software: Ensure vDisplay Mana...

Why doesn't the OSD menu auto-rotate to match the monitor's orientation?

The [Auto Pivot] feature for the OSD menu must be manually enabled in the monitor's settings or synced via the vDisplay Manager software. Step-by-Step Instructions: Open OSD: Press the monitor buttons to bring up the [Main Menu]. Navigate to Setup: Go to the [Setup Menu] tab. Enable Auto Pivot: Locate the [Auto Pivot] setting and t...

Do VP series monitors support Apple Mac Thunderbolt connections?

Yes, fully supported. Every Apple Mac with a Thunderbolt port is designed to output a DisplayPort signal, ensuring 100% compatibility with ViewSonic monitors via the appropriate cable or direct connection. Compatibility Breakdown: Thunderbolt 3 / 4 / 5 / USB4 (USB-C Form Factor): Status: Fully Compatible. Mechanism: These ports ...

How to enable the input source auto detect function?

Please open the OSD menu and navigate into “Input Select”. Then, select Auto-Detect and make sure it is set to ON.

How to set the OSD pivot feature to auto when it is greyed out in the OSD menu?

Temporarily select a different OSD rotation option and then set the Auto option again. If the option is still greyed out, apply All Recall from the monitor’s OSD Setup Menu.

What ViewSonic monitors can support Auto Pivot function?

As of Dec. 8 2020, below VP models support Auto Pivot function.   VP2458, VP2468, VP2468a, VP2768, VP2768a, VP2785-4K VP2768-4K, VP2785-2K, VP2771, VP2775, VP3268-4K.   Please refer to below steps to enable the function.   1.Download and install vDisplay Manager. 2.Follow UG for connection and setting. 3.Enable DDC/CI in monitor OSD to...

How to disable Auto Pivot function under Windows 10?

You can set the Orientation setting to Landscape/CW90°/CCW90° or disable the “Auto Pivot” application.

Why can’t my Windows desktop rotate to match the monitor’s orientation when OSD pivot function is set to Auto?

Since OSD pivot function in the OSD menu only affects the OSD menu itself. Please also install vDisplay Manager in your operating system so that your operating system screen can automatically rotate with the monitor’s orientation.