How to Upgrade the M1+ Firmware?

  <Notice> The firmware of M1+ will not be used on M1+_G2/_V or M1+ -2.   1. Go to “Downloads” -> ”Driver & Software” by searching M1+ from ViewSonic website to download “M1+ Firmware Update v2.03”.      2. Unzip the downloaded files and copy the Firmware files, “MstarUpgrade.bin" and "M1+WW.bin” to a FAT32 formatted USB drive.  3. Po...

Why can't the M1 mini Power On or Auto Shutdown after charging?

    1. Using a power bank or a USB power adapter with DC output of 5V/2A is required via the Micro USB port for charging the M1 mini battery.   2. Charge the projector for 2 hours (5V/2A) before using it in battery mode for the first time.   Battery Usage Time Information     NOTE:  When the projector is in use, a 5V/2A power ada...

Why is Smart YouTube app not available on Aptoide app store?

Aptoide store removed Smart YouTube apk from their app store. We recommend you download and install SmartTube apk to play YouTube videos. https://smarttubenext.com/#Download_SmartTubeNext_APK_for_Android_Based_Smart_TVs Applicable models: M1MINI, M2, M2e,M1_G2, M1+_G2, M1MINIPLUS, X10-4k,X100-4K,X1000-4K

What ViewSonic projectors support audio in/out via Bluetooth?

As of April 2021, below is BT support model list.

How long does the ACP501 take to charge?

A full charge takes about 1.5 hours from 0% and will last for up to 11.5 hours of constant use. *Note* A 10-minute charge is about to support around 1 hour of use.

What do the different color lights mean?

1. When in use：     Green light: iPad mode     Blue light: Capacitive device mode 2.  When Charging：      Constant red light: Charging      Flashing green light: Low power *The light will be off when the stylus is in charging

How do I switch between pen modes?

Please tap on the back of pen with your finger to switch the pen from iPad mode (green light) to Capacitive mode (blue light).

Can I use other stylus for ID2456?

Yes, ViewStylus ACP501 is compatible with ID2456.  However, you need to download firmware before you use.  Please download firmware by clicking the “ID2456 firmware update for ACP501” link. For more details about ACP501, please visit https://www.viewsonic.com/global/products/pendisplay/ACP501.

What is a Receiving Card on a DVLED Display?

Answer: The Receiving Card (aka Receiving Board) plays a part in supplementing LED Module signal connection. It is directly connected to the Transfer Board as shown in Diagram 1 below. Diagram 1: Receiving Card mounted onto Transfer Card Signal is taken from the Transfer Board and sent to the Receiving Card, thus distributing th...

How to update CDE5510/6510 Firmware?

1. Copy the firmware image file to a USB storage device's root directory.   NOTE: the USB storage device must be formatted with FAT32.   2. Turn off the display via the power switch.     3. Plug the USB storage device into CDE5510/CDE6510's USB port.     4. Turn on the display via the power switch.     5. Once turned on, you ...