Where is the back hole location for where the system control power cable can pass through on DVLED Displays?

Refer to the schematic below for dimensions and approximate location of the power cable back hole. Note: HDMI/USB back hole configurations are displayed here, however, your current firmware may not support the HDMI back hole configuration.

How do I install a DVLED display with a Floor Stand configuration?

Please refer to this link before beginning any Direct View LED Display installs. Solution Step 1: Install the Floor Stand Step 2: Install the System Control Box onto the Floor Stand Step 3: Install the Cabinets onto the Floor Stand, connect the System Control Box to the Cabinets Step 4: Install the LED Modules onto the Cabin...

What does pressing "Blank" do on a DVLED Display, and how does it differ from "Standby mode"?

Answer: Blank can quickly switch between a black screen and the input screen. This feature simply displays a blank screen and does not turn off the system controls. Similarly, "Hibernate" Standby mode powers off the screen only but still has minor power utilization for temporary memory purposes. In complete contrast, "Sleep" Standby mode po...

How does the signal get transmitted across components on a DVLED Display?

Solution The signal will be sent from the “Main Board” and transmitted in three ways: 1) The first path is from the “Audio Board” to the “Speaker” 2) The second path is to the “RS232 Module” 3) The third path is from the “Transfer Board” to the “Receiving Board,” and from the “Receiving Board” to the “LED Module.” ...

What questions do I need to consider before installing my DVLED Display?

Where will the product be installed? Is the power outlet separated and not shared with any other appliance? Will the power cable be hidden behind the Direct View LED (not seen), or will it be visible (wire will be seen)? What type of wall will the unit be mounted to? Is the wall composed of block, drywall, plaster, wood or metal studs? Do...

Do I have to wear the anti-static gloves when installing LED modules for the DVLED Display?

Answer: Yes. Anti-static gloves prevent electrical discharge from the hands, preventing potential shorting of the LED module.

Does Power Consumption differ across dvLED products?

Power Consumption will vary by model. Please refer to the table below to see full power consumption details for the listed dvLED products: LDM108-121 Normal 1330W Max 1900W (White Pattern, Brightness 100%) ≈570W(256 Grey Pattern, Brightness 100%) LD135-151 Normal: 2030W Max 2900W (White Pattern, Brightness 100%)  ≈870W(256 Grey Pa...

What is "Low Input Lag" and which one should I choose?

Input lag means the time difference between when user controls PC and sees the response on monitor.      There is a trade-off to picture/video performance. If no particular demand, it is suggested to set it to off.

How to check graphics card drivers in Windows?

1.Under "Control Panel", open "Device Manager". 2. Find the Display adapters and double click on it then double click on the device shown: 3.Select Driver tab, this will list the Driver version.

How to clean LCD display?

General Precautions Make sure the monitor is turned off and the power cable is unplugged from the power outlet. Never spray or pour any liquid directly onto the screen or case. Doing so could damage your monitor. Dust or hard materials may scratch the screen. Please make sure the cleaning cloth is free of any debris. Clean and dry the m...