What to do if "No Signal" appears on the ViewBoard while connecting an external device (HDMI, USB-C, or PC)?

Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...

How do I remote control IFP5550/6550/7550/8650-1 (Gen. 1) power on/off via SureMDM?

Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1)  ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643

What model can be installed to VB-STND-001?

VB-STND-001 supports ViewSonic display up to 86".

Cloud drive doesn’t remember logins, how can I do?

You can click the setting icon to entry privacy setting. To select "No Need", then cloudy drive won't log out automatically.

What the max. external HDD capacity can be supported for IFP7550?

IFP7550 USB port 3.0 supports external HDD up to 4TB. Below models had pass the read/write test. WD: WDBUY0040BBK(4TB) SEAGATS: STDR2000301(2TB) TOSHIBA: HDTC810YR3AA(1TB) SONY: HD-E1(1TB)

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

What's the difference if I'm running ViewBoard 2.1 with inactivated version?

Below features won't be included with ViewBoard 2.1 inactivated version. Handwriting:   Crescent Mode:   Page Ball Mode:   Pen (only 2 pens available):      

Can I use my Chromebook to cast to the ViewBoard screen?

Yes. Install the vCastSender Chrome Extension from the Chrome Web Store to wirelessly cast your screen to the ViewBoard. Steps: Install Extension: Open the Chrome browser, go to the Chrome Web Store, and search for and install the [vCastSender] extension. Network Connection: Ensure both your Chromebook and ViewBoard are connected to t...

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF:       When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed.    With this connection, both built-in and external speakers will output audio.        You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly  3. If you connect from PC, please make sure the com port is correctly chosen.         4. It's recommended to vController to control the Viewboard by RS232.     Please r...