ViewBoardWsparcie - ViewSonic Poland

What to do with black image when playing YouTube videos by Chromium?

Black image means that the specific video format isn't supported by Chromium. You can play such videos by integrated Browser in Embedded Player.

What default app can be displayed in the ViewBoard vLauncher?

Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.

How to make sound output from external speaker bypass integrated speaker in IFP30/50 series?

Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.

Why my MacBook with MacOS v10.11 can't get touch feedback from IFP7550?

It's a software limitation from MacOS. Please upgrade MacOS to v10.13 or later to solve the issue.

What to do when the touch function has no response on the ViewBoard?

If touch fails across all input sources, you can perform a system initialization using the [INIT TV] command in the Debug Menu. Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Execute Initialization: Locate and select [INIT TV] from the pop-up menu. System Restart: The dev...

Can I use my Chromebook to cast to the ViewBoard screen?

Yes. Install the vCastSender Chrome Extension from the Chrome Web Store to wirelessly cast your screen to the ViewBoard. Steps: Install Extension: Open the Chrome browser, go to the Chrome Web Store, and search for and install the [vCastSender] extension. Network Connection: Ensure both your Chromebook and ViewBoard are connected to t...

How can I lock the touch function on IFP5550/IFP6550/ IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the touch fun...

What to do if "No Signal" appears on the ViewBoard while connecting an external device (HDMI, USB-C, or PC)?

Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...

How can I setup touch on extended display?

Please refer to this video.

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController. <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.