Is there Linux drivers for my monitor?

No, as Linux system should automatically identify and recognize the monitor.

How to change refresh rate in windows 10?

Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE

What to do if there is flickering image with my monitor?

Check the monitor: Please do memory recall. Please refer to this FAQ Check device setting: Please check and set to recommended refresh rate.  You can refer to this video. https://www.youtube.com/watch?v=sAkbjPiLNcE   If possible, please connect monitor to another device with different input.   If above doesn’t help, please contact ViewSo...

Should I install MacOS drivers for my monitor?

MacOS does not require monitor drivers when using a ViewSonic monitor. The MacOS will automatically read the EDID information stored in the monitor and use the system information/profiler utility to detect the monitor’s specifications and capabilities.  If you can not get native resolution or refresh rate on the monitor:   Please check if ...

Which Cable Do I Need For 144Hz?

To output:   1.1080p content at 144Hz, you will need either a dual-link DVI, a DisplayPort, or an HDMI 1.3 or higher cable.    2. 1440p at 144Hz, you will need at least an HDMI 2.0 or a DisplayPort 1.2 cable.   3.4K at 144Hz, you will need a HDMI 2.1 or a DisplayPort 1.4 cable which can carry 120Hz signal without compression.

Why can't I choose Contrast or Brightness?

ViewSonic develops several preset modes (ViewMode) such as Game/Movie, etc. These presets are specifically designed to deliver an optimized viewing experience for different screen applications.   Under specific preset modes, some settings are fixed and cannot be adjusted. Please set to “Standard” mode if you want to adjust.

How to solve the overscan problem with my monitor?

If the image does not fill the screen of the monitor or if it looks like the image is slightly too big for the monitor, try below suggestion.   1.Adjust setting on the PC/laptop:   (1)Set native resolution of monitor in your PC/laptop's Display settings.   (2)Change Scaling in Display settings.   Use the graphic card software to change ...

How to restore the default settings of my monitor?

Please follow below steps:   Open OSD menu:               (1) For monitors with [1] and [2] buttons on the front panel, press the number “1” button on the                     monitor.               (2) For monitors with buttons behind the monitor, press the second button from the top.                (3) For monitors with a joystick...

How to check graphics card drivers in Windows?

1.Under "Control Panel", open "Device Manager". 2. Find the Display adapters and double click on it then double click on the device shown: 3.Select Driver tab, this will list the Driver version.

How to set proper Response Time with Viewsonic monitors?

Response time option can be selected under different View Mode. Viewmode => Standard => Response time => Standard / Advanced / Ultra fast  Viewmode => Game => Response time => Standard / Advanced / Ultra fast In both cases, while selecting the “Advanced” or even “Ultra fast”, it brings a very strong ghosting effect and blurry while scro...

Contact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.