Can I turn on 1ms MPRT and FreeSync at the same time?

MPRT and FreeSync are incompatible with each other because: MPRT will KEEP the refresh rate at a high and constant point. FreeSync will CHANGE the refresh rate continuously in a range between the minimum and maximum rate of the monitor.   Therefore, all ViewSonic monitors that have MPRT(1ms) and FreeSync are not able to have both functio...

Is there Linux drivers for my monitor?

No, as Linux system should automatically identify and recognize the monitor.

Should I install MacOS drivers for my monitor?

MacOS does not require monitor drivers when using a ViewSonic monitor. The MacOS will automatically read the EDID information stored in the monitor and use the system information/profiler utility to detect the monitor’s specifications and capabilities.  If you can not get native resolution or refresh rate on the monitor:   Please check if ...

Which Cable Do I Need For 144Hz?

To output:   1.1080p content at 144Hz, you will need either a dual-link DVI, a DisplayPort, or an HDMI 1.3 or higher cable.    2. 1440p at 144Hz, you will need at least an HDMI 2.0 or a DisplayPort 1.2 cable.   3.4K at 144Hz, you will need a HDMI 2.1 or a DisplayPort 1.4 cable which can carry 120Hz signal without compression.

What to do when no video by using HDMI port?

If you are experiencing problems using HDMI input, suggest do the followings:   Please check below on monitor:   Make sure the correct HDMI input is selected in OSD. Turn on the monitor first then PC.   Please check below on PC:    Test the monitor on a different computer with a HDMI port. Replace another HDMI cable. If...

How to set proper Response Time with Viewsonic monitors?

Response time option can be selected under different View Mode. Viewmode => Standard => Response time => Standard / Advanced / Ultra fast  Viewmode => Game => Response time => Standard / Advanced / Ultra fast In both cases, while selecting the “Advanced” or even “Ultra fast”, it brings a very strong ghosting effect and blurry while scro...

How to solve the problem with my monitor as it turns off automatically?

If the monitor turns on briefly, then turns off, check the following: Make sure the power cable is securely connected. Turn off the monitor, unplug the power cable for 15 seconds and plug the power cable back then turn on. Check the video cable and make sure it is connected on both ends securely.           Reset the factory default ...

How to set landscape and portrait Mode?

Several ViewSonic LCD panels support both Landscape and Portrait modes.  If your LCD panel supports this feature, you can switch modes by turning the screen as shown in the diagram below. To change the image on the Windows Desktop, follow instructions below: Open the Start menu and click "Control Panel." Click "Adjust Screen Resolution"...

How to Install Unsigned Drivers in Windows 10

When installing unsigned drivers on Windows 10, Windows pops up a warning saying Windows can’t verify the publisher of this driver software.        The following are instructions on how to install unsigned drivers in Windows 10.    NOTE: Checking driver signatures is a security feature in Windows, and disabling it is not rec...