How to install the base on VX2476/VX2776/VX3276 series monitors?

You can refer to this video. 1. Lay the monitor unit face down on a flat surface, using the soft bag received or a soft material to avoid damaging the screen. 2. Insert and align the Neck of the stand (Do NOT attach the base to the neck) into the stand slot on the display. 3. Firmly push the neck into the slot while securing t...

Can I turn on 1ms MPRT and FreeSync at the same time?

MPRT and FreeSync are incompatible with each other because: MPRT will KEEP the refresh rate at a high and constant point. FreeSync will CHANGE the refresh rate continuously in a range between the minimum and maximum rate of the monitor.   Therefore, all ViewSonic monitors that have MPRT(1ms) and FreeSync are not able to have both functio...

How to enable debug mode on commercial displays?

1. Download ADB from: https://developer.android.com/studio/command-line/adb.html  2. Press MENU 9 9 1 on the display's remote control to show the Service Menu or Debug Menu. 3. EP5540/ EP554T/EP5542/EP5542T:  Service Menu > OS Setting > ADB Enable   4. CDE6520/CDE7520/CDE8620:  Debug Menu > System Debug > ADB Switch   5. CDE4320/...

Whiteboard for Windows will not start. Application opens and closes immediately.

Step 1  In Windows 10, Search for and open "Event Viewer".  Then go to: Windows Logs > Application.  Check your Windows Event Viewer and look for an Application Error message related to vBoard.exe.  Step 2 From the above Event Viewer, if you find libcef.dll in the description under the Details tab, this means there are missing files ...

How to set up video wall in daisy chain?

Here’re major steps to set up video wall in portrait position for your reference. 1. Set up  monitor ID in OSD menu as 1~4 prior to mounting monitors.   2. Connect  IR sensor cable to monitor 1.   3. Connect  the PC to monitor 1 with DP cable firstly for easy setup & adjustment  afterwards.   4. Mounting  monitor 1/2/3/4 in portrait p...

How to manually install LED monitor drivers under Win10 64-bits?

If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...

ViewSonic Projector RS232 protocol

ViewSonic Projector RS232 v1.19

What can I do when I see "All functions locked” message on IFP5550/IFP6550/IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP70. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70.   You can press front control button “SETTING” “VOL+” “VOL-“ “VOL+” “VOL-“ in sequence to unlock.

Why are certain options greyed out in OSD menu?

When a digital signal is connected (e.g. HDMI, DisplayPort, DVI), there are certain options greyed out in OSD menu as preset settings that cannot be changed. Those greyed out settings will be available when an analog signal (e.g. VGA) is connected.

What to do if remote control does not work properly?

  Please do the following check: Make sure there are no obstructions in the way of the IR receiver on the device. Move closer to the receiver (within 23 feet) or change the angle (within 30 degrees) to the receiver. Replace the batteries. Even if lights on the remote control are on, weak batteries may still cause the remote control to oper...