What is the Bracket installation order of the DVLED Floor Stand configuration?

The Bracket installation order varies from the Wall-mount configuration. Please follow the steps in the respective order for the Floor Stand configuration: Bottom cross beam installed to the left and right supports. Top cross beam installed to the left and right supports. Original mounting bracket removed from the top and reattached to the ...

What is the Installer Certification Program for DVLED displays?

Answer: Installer Certification Program is a training for installers, resellers, or other technical personnel to build skills and knowledge for confident and repeatable service and quality of installation for Direct View LED Displays. The program consists of Theory (Lesson 1 Working Principles, Lesson 2 Easy Installation, Lesson 3 Ease of Troub...

Do ViewSonic DVLED displays support anti-blue light?

Answer: DVLED displays do not support anti-blue light at this time.

What is the LED module specs for DVLED Displays?

LED module specs for DVLED Displays will vary by model. Please refer to the following table below:

What is a "Customer Maintenance Notice" for dvLED displays?

Answer: The Customer Maintenance Notice is a document that should be explained to the customer on-site, immediately after dvLED installation (during or after software setup). The document contains crucial information regarding proper usage and maintenance critical to effectively extending the life cycle of the product.   Note: Full documen...

What are the power source requirement for DVLED?

Power Receptacle Type L5-30P, EU, UK, AU, CN  (may vary depending on region. double check power supply compatibility) Power Input Voltage Range 100-240 V ~ 50/60Hz Input Current 30A max @110V; 15A max@220V Leakage Current <0.25mA@240VAC Power Outlet quantity 1 (for 108", 135", 163"), 2 (for 216") *Recommended use on a singl...

Can we use display grouping function on 2nd gen LDM & LDC ?

Yes. Please make sure you follow the below steps. Turn off Wireless hotspot on LDM/LDC. (Settings --> Network --> Wireless hotspot --> Disable) Use Mouse to select the display in vCast under Display group settings --> Device list

How much is the power output of LDS138-151's power socket (PC socket) on the back of the display ?

Max power output is 85Kw

What is a Receiving Card on a DVLED Display?

Answer: The Receiving Card (aka Receiving Board) plays a part in supplementing LED Module signal connection. It is directly connected to the Transfer Board as shown in Diagram 1 below. Diagram 1: Receiving Card mounted onto Transfer Card Signal is taken from the Transfer Board and sent to the Receiving Card, thus distributing th...

How does the signal get transmitted across components on a DVLED Display?

Solution The signal will be sent from the “Main Board” and transmitted in three ways: 1) The first path is from the “Audio Board” to the “Speaker” 2) The second path is to the “RS232 Module” 3) The third path is from the “Transfer Board” to the “Receiving Board,” and from the “Receiving Board” to the “LED Module.” ...