Install the wall mount using the template, mount the projector for alignment, and set up the Laser Curtain module for interactive touch capabilities.

Step-by-Step Instructions:

1. Wall Layout: Use the included [Installation Template] to mark the drilling holes on the wall. Ensure the center line matches your projection surface's center.

2. Mounting the Plate: Drill holes, insert wall anchors, and securely bolt the [Wall Mount Plate] to the wall. Double-check with a level tool.

3. Projector Attachment: Secure the projector onto the [Adjustable Mount Arm], slide it into the wall plate, and tighten the safety bolts.

4. Image Alignment: Power on the projector and use the [Test Pattern]. Adjust the knobs on the mount arm to calibrate rotation, tilt, and keystone until the image fits the screen perfectly.

5. Laser Curtain Installation: Fix the [Laser Curtain Module] at the top center of the projection area and connect the USB cable to the projector's interactive port.

6. Interactive Calibration: Run the [Auto Calibration] tool within the OSD menu to sync the laser sensors with the touch inputs.

Please refer to the video in YouTube as below link.

https://www.youtube.com/watch?v=OPZ-25Q-BAk