Why is my monitor not detected by the Firmware Update Tool?

Please make sure to use “FW_Update_Tool_v1.08”. Please follow the step by step instructions below to resolve the problem. When the program is initialized, the error message shown below will appear. A Windows error message might also pop up few seconds later. Please close the program and the error messages, then follow the in...

How do I enable 4K resolution with a 60Hz refresh rate via USB Type-C?

To enable 4K at 60Hz over USB, go into the OSD Setup Menu -> Select ‘"SB 3.1" -> Select "Turn Off".   * Using USB Type-C to display 4K resolution at a refresh rate of 60Hz requires you to turn off USB 3.1. ** Current only the following VP monitors support 4K at 60Hz via USB Type-C: - VP2785-4K  - VP3881

How to Download and Enable the Auto Pivot Feature?

The Auto Pivot feature is now integrated into the ColorPro Display Manager software; there is no longer a standalone download for Auto Pivot. Steps: Visit the [ColorPro Software Download page]. ColorPro Software Download | ViewSonic or by clicking here. Download and install ColorPro Display Manager for your specific OS (Windows or M...

Why is the auto-pivot function not able to detect my monitor’s orientation?

Auto-Pivot requires DDC/CI enabled, OSD Pivot set to Auto, and the dedicated software running in the background. Troubleshooting Steps: Configure Monitor OSD Settings: Open the [Setup Menu]. Ensure [DDC/CI] is toggled to [On]. Set [OSD Pivot] to [Auto].                     Enable Control Software: Ensure vDisplay Mana...

Why can’t my monitor automatically detect a source?

The "Auto Detect" feature is disabled by default on many models. You must manually enable it within the OSD menu to allow the monitor to switch between active ports automatically. Step-by-Step Instructions: Press the physical button to call up the OSD Main Menu. Navigate to the [Input Select] section. Locate [Auto Detect] at the bo...

Do VP series monitors support Apple Mac Thunderbolt connections?

Yes, fully supported. Every Apple Mac with a Thunderbolt port is designed to output a DisplayPort signal, ensuring 100% compatibility with ViewSonic monitors via the appropriate cable or direct connection. Compatibility Breakdown: Thunderbolt 3 / 4 / 5 / USB4 (USB-C Form Factor): Status: Fully Compatible. Mechanism: These ports ...

Why doesn't the OSD menu auto-rotate to match the monitor's orientation?

The [Auto Pivot] feature for the OSD menu must be manually enabled in the monitor's settings or synced via the vDisplay Manager software. Step-by-Step Instructions: Open OSD: Press the monitor buttons to bring up the [Main Menu]. Navigate to Setup: Go to the [Setup Menu] tab. Enable Auto Pivot: Locate the [Auto Pivot] setting and t...

Why is Auto Pivot not working on macOS, and how to fix it?

To make auto pivot work, the communication between OS and monitor is necessary. In Mac OS X or prior version, such communication is done by HDMI signal. However, in Mac OS Sierra and later, Apple changed the behavior in which this is no longer communicated with HDMI signal.   Thus, it's necessary to connect both VP2468/VP2768 and iMac by a ...

How many screens can PBP (Picture-by-Picture) mode support on VP series?

The model of the monitor will determine how many screens can be supported, and how the screen is divided. Screen Division Model Support 4 screens VP2785-4K VP3268-4K VP3481 VP3881 2 screens VP2771

What VP Series monitors support vDisplay Manager?

As of Sep. 2 2021, vDisplay Manager supports the following VP series monitors:   VP2458  VP2468 VP2468a VP2768 VP2768a VP2768-4K VP2768a-4K(Win)  VP2771 VP2785-4K VP2785-2K VP3268-4K VP3268a-4K(Win) VP3481 VP3481a VP3881