Skip to main content

How do I disable the Android OS in IFP?

Please follow below instructions to disable the Embedded Player(Android OS).   Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Go to “Player Settings"-> "Embd Player" and turn it to OFF by using the direction button on remote control, choose OK button when prompt confirm messag...

What are the ViewBoard Network Requirements?

Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099

How can I replace the IFP50 series’ boot up image and animation?

Please find the instructions and requirements in the attached PDF. File URL:https://support.viewsonic.com/helpdesk/attachments/33039346408

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP.  When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is  turned on. <Note> Not all HDMI ports on IFP suppo...

How to activate the preinstalled Windows 10 trial in VPC10/VPC14?

1. Purchase the product key online or via Microsoft distributor. 2. Once you have the key, click “Start > Settings > Update & security > Activation > Change the product key”, then enter the new product key then click Next to Activate.

How can I lock the front panel buttons on IFP5550/IFP6550/ IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. . Please refer either method below:   You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the font panel but...

How can I adjust color temperature on IFP?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**30, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**30, IFP**70     Due to Android limitation, color temperature is only adjustable in other source(HDMI/PC, etc), not in Embd player...

ViewBoard Lite cannot import SVG file successfully, how can I do?

It is software limitation, ViewBoard Lite only can import SVG file that created by itself. 

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly  3. If you connect from PC, please make sure the com port is correctly chosen.         4. It's recommended to vController to control the Viewboard by RS232.     Please r...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

ViewBoard Support

General Questions Interactive Display Technical Documents

General InquiriesContact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.