Why sharpness setting in OSD menu is grey out on my XG2702 and VA2719-2K-SMHD?

When resolution is set in native resolution (1:1), both Sharpness and Overscan option in OSD will be grey out.

How to install the base on VX2476/VX2776/VX3276 series monitors?

You can refer to this video. 1. Lay the monitor unit face down on a flat surface, using the soft bag received or a soft material to avoid damaging the screen. 2. Insert and align the Neck of the stand (Do NOT attach the base to the neck) into the stand slot on the display. 3. Firmly push the neck into the slot while securing t...

Can I turn on 1ms MPRT and FreeSync at the same time?

MPRT and FreeSync are incompatible with each other because: MPRT will KEEP the refresh rate at a high and constant point. FreeSync will CHANGE the refresh rate continuously in a range between the minimum and maximum rate of the monitor.   Therefore, all ViewSonic monitors that have MPRT(1ms) and FreeSync are not able to have both functio...

What to do if there is shadow or double image on screen?

This can be caused by a long cable or docking stations.   Longer cables may be prone to ghosting, lines, double images, or poor focus.  The improper shielding of the cables can cause a shadowing or ghosting effect also.    We recommend to check the video cable and, if possible, use HDMI Premium certificate cable for long distance connectio...

What to do if there is flickering image with my monitor?

Check the monitor: Please do memory recall. Please refer to this FAQ Check device setting: Please check and set to recommended refresh rate.  You can refer to this video. https://www.youtube.com/watch?v=sAkbjPiLNcE   If possible, please connect monitor to another device with different input.   If above doesn’t help, please contact ViewSo...

How to do color calibration with my monitor?

Please refer to this FAQ, find "Calibrate your display" section and follow the instruction.

Should I install MacOS drivers for my monitor?

MacOS does not require monitor drivers when using a ViewSonic monitor. The MacOS will automatically read the EDID information stored in the monitor and use the system information/profiler utility to detect the monitor’s specifications and capabilities.  If you can not get native resolution or refresh rate on the monitor:   Please check if ...

Which Cable Do I Need For 144Hz?

To output:   1.1080p content at 144Hz, you will need either a dual-link DVI, a DisplayPort, or an HDMI 1.3 or higher cable.    2. 1440p at 144Hz, you will need at least an HDMI 2.0 or a DisplayPort 1.2 cable.   3.4K at 144Hz, you will need a HDMI 2.1 or a DisplayPort 1.4 cable which can carry 120Hz signal without compression.

Why does image persistence occur with my LCD monitor?

Image persistence (or image retention) is a result of a stationary image being displayed for a long period of time.    <Correction>   Turn off the screen for hours.   <Prevention>   1. Set the display to turn off after a few minutes of system idle under ”Power & Sleep “ (Win10) or “Battery” (Macbook).      2. Turn off the monitor when ...

How to solve the overscan problem with my monitor?

If the image does not fill the screen of the monitor or if it looks like the image is slightly too big for the monitor, try below suggestion.   1.Adjust setting on the PC/laptop:   (1)Set native resolution of monitor in your PC/laptop's Display settings.   (2)Change Scaling in Display settings.   Use the graphic card software to change ...