Does NMP-302w and NMP580-W support touch content?

NMP-302w and NMP580-W support EP5520T touch function, you can use these two models with EP5520T, then you will have touch function.

How to use ADB tool commend to get a vSignage player screen shoot?

Download ADB from 1. Run cmd commend and go to the adb save folder that connect to device via Adb over TCP, if use Adb wire, skip this step     adb connect {ip} for example:  adb connect 2. Take screen shot and save to device     adb shell screencap -p /sdcard...

Where to apply Sigange Manager and vSigange Weather API key

Apply web URL 

EP5520/EP5520T vSignage cut-in S/N

    Product Cut in S/N EP5520T phase-in from UVE173100001 EP5520 phase-in from T91173300001

How to install vSignage License on EP5520 /EP5520T/ EP5540/EP5540T?

Requirements: - USB Flash Drive (FAT32 Formatted): How to format USB flash drive to FAT32 - vSignage license file, available on the Download section of the product's page* 1. Copy the license file (license-production_VSI.PKG) to the root directory of the USB flash drive. 2. Insert the USB flash drive into USB port of the display....

How to set up video wall in daisy chain?

Here’re major steps to set up video wall in portrait position for your reference. 1. Set up  monitor ID in OSD menu as 1~4 prior to mounting monitors.   2. Connect  IR sensor cable to monitor 1.   3. Connect  the PC to monitor 1 with DP cable firstly for easy setup & adjustment  afterwards.   4. Mounting  monitor 1/2/3/4 in portrait p...

How to calibrate touch function on IFP/EP in Win 10?

Please follow below steps:   Click Start and then Control Panel, and next Hardware and Sound. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input.     On the Display tab, under Display options, tap Calibrate and then Yes to allow the program to make changes.       4.Select the Touch input option.     ...

Can an antenna be connected to a commercial display?

ViewSonic Commercial Displays do not support antenna or coaxial cable connection.

How to check whether vSignage can sync with others players and see the campaign?

If you are unable to sync the contents, there may be a connection issue.    To verify if the admin is sync with the player, there is a JSON API in vSignage. 1. First make sure your windows firewall setting has allow vSigange to access. 2. Please use this API to check if source player see any other players and campaign. Open the Chrome br...

How to check CDX series , videowall, model RS232 daisy chain working correctly

1. Is it correct of RS232 daisy chain cable ? 2. In OSD menu, General settings -> Eco mode please set to Normal. (If set to Low power standby, the unit can power OFF but can’t power ON) 3. The RS232 daisy chain cable is 2.4mm – 2.4mm

Contact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.