How do I disable the Android OS in IFP?

Please follow below instructions to disable the Embedded Player(Android OS).   Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Go to “Player Settings"-> "Embd Player" and turn it to OFF by using the direction button on remote control, choose OK button when prompt confirm messag...

Can I use my Chromebook to cast to the ViewBoard screen?

Yes. Install the vCastSender Chrome Extension from the Chrome Web Store to wirelessly cast your screen to the ViewBoard. Steps: Install Extension: Open the Chrome browser, go to the Chrome Web Store, and search for and install the [vCastSender] extension. Network Connection: Ensure both your Chromebook and ViewBoard are connected to t...

How to do when the message on my IFP5550/IFP6550/IFP7550/IFP8650, "The device has been locked, please use the U disk to unlock"?

1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer below steps to unlock: 1. Prepare a FAT32 formatted USB drive. 2. Unzip Unlock.zip attached and copy to the USB drive root directory. 3. Insert the USB to I...

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF:       When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed.    With this connection, both built-in and external speakers will output audio.        You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

Is it possible to select different time zone for date

The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with internet connection.

Is there any recommended slot-in PC which can support vPro and TPM?

VPC14-WP-x and VPC12-WP-x can support both Intel® vPro and TPM 2.0.

What is the resolution of IFP7550 OSD menu?

The resolution of IFP7550 OSD menu is 1080P.

What to do as it shows a warning message “Program not activated, will exit in 30 minutes” when running vBoard?

vBoard will be activated automatically while Internet in connected. Please make sure your IFP display is well connected to Internet.

What to do if "No Signal" appears on the ViewBoard while connecting an external device (HDMI, USB-C, or PC)?

Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...