What is the LED module specs for DVLED Displays?

LED module specs for DVLED Displays will vary by model. Please refer to the following table below:

What is the Cabinet installation order of the DVLED Floor Stand configuration?

The Cabinet installation order varies from the Wall-mount configuration. Please follow the steps in the respective order for the Floor Stand configuration: Cabinet B moved to the left side of the floor stand bracket Ensured rear-cabinet mounting bracket is securely placed onto the top cross beam of the floor stand Ensured notches under the ...

How do I adjust the LED Module edge brightness on my DVLED Display?

When you find that the edge brightness of the LED module is different from that of the adjacent modules, the following procedure below can be followed in order to resolve the problem. Solution Step 1: Use the USB B-to-A cable and HDMI cable to connect the monitor to the computer, and switch the monitor's input source to HDMI. Step...

How do I properly package DVLED Display LED module(s) for shipping?

Before LED Modules are shipped out, they must be packaged in a specialty Module Box according to the following packaging steps specifically designed to hold LED modules. Please refer to the Proper LED Module Packaging SOP for full details. Solution Obtain the Module Box(s). Each module box should be able to hold 4 LED modules.  NOTE: ...

Do dvLED displays have power protection during on/off?

Answer: Generally speaking, low-end LED displays do not have a power protection mechanism and are more susceptible to damage. Users should avoid repeatedly turning on/off the power to avoid damaging the display for all models. 

LED Module(s) are improperly functioning on my DVLED Display, what is the troubleshooting process?

If one or more LED modules are improperly functioning by: image distortion, color distortion, no display image, flashing display image, please refer to the "Standard Display Troubleshooting" solution below. Solution Step 1: Ensure the LED module is installed in the correct orientation before proceeding. Step 2: Check proper funct...

Does Power Consumption differ across dvLED products?

Power Consumption will vary by model. Please refer to the table below to see full power consumption details for the listed dvLED products: LDM108-121 Normal 1330W Max 1900W (White Pattern, Brightness 100%) ≈570W(256 Grey Pattern, Brightness 100%) LD135-151 Normal: 2030W Max 2900W (White Pattern, Brightness 100%)  ≈870W(256 Grey Pa...

What happens if I didn't wear Anti-static gloves when handling LED modules on my DVLED Display?

Answer: There may be damage to the LED module's circuitry. Please check for unlit LEDs and refer to the LED Acceptance Criteria to replace appropriately. Related link: "Do I have to wear the anti-static gloves when installing LED modules for the DVLED Display?"

What is COB Technology option on a DVLED Display?

Answer: Chip-on-Board or "COB" refers to the mounting of a bare LED chip in direct contact with a substrate, to produce LED arrays. Differences between SMD LED and COB LED consists of: SMD COB Horizontal Chip Flip Chip has LED PCB does NOT have LED PCB (smaller chip) has gold wires does NOT have gold wires (less blockage of light)...

What is a Transfer Board on a DVLED Display?

The Transfer Board (also known as a Transfer Card) is an internal component that facilitates signal connections between LED modules and the cabinet. Note: Current models have largely transitioned to "3-in-1 Boards." This article is for legacy product maintenance and technical reference only. Key Functions: Signal Supplementing: Routes ...