Why iPhone’s Mobile hotspot is not connecting with M2?

If you have problem connecting to hotspot on M2,  Toggle your mobile hotspot (ON -> OFF -> ON). Toggle Wi-Fi option on the projector (ON -> OFF -> ON). Restart your iPhone and try connecting M2 to Mobile hotspot.

Why doesn't the "Auto Keystone" feature work on the M1 and M1+?

Ensure the Auto Keystone feature is “ON”  1. Go to Settings > Image Settings > Auto Keystone  2. Press < or > to select: ON: Automatically adjusts the Keystone number.  OFF: Manually adjusts the Keystone number.   Auto Keystone can be turned off by pressing the Up or Down buttons on the remote control. This will turn Auto K...

How do I watch Netflix on the M1 or M1+ with my mobile phone?

To watch videos on Netflix with the M1 or M1+, we suggest: For Wired Connections: NOTE: Please check the specifications of your device before buying any accessory mentioned below. If using a direct USB-C to USB-C cable, please make sure to review our USB-C Compatibility list to view the supported devices.   iOS Based Device: Con...

How to Upgrade the M1+ Firmware?

  <Notice> The firmware of M1+ will not be used on M1+_G2/_V or M1+ -2.   1. Go to “Downloads” -> ”Driver & Software” by searching M1+ from ViewSonic website to download “M1+ Firmware Update v2.03”.      2. Unzip the downloaded files and copy the Firmware files, “MstarUpgrade.bin" and "M1+WW.bin” to a FAT32 formatted USB drive.  3. Po...

LS921WU is not recognized nor controlled through the web browser by PJ-link

Applicable models: LS600W, PG707X, PG707W, PG706HD, PG706WU, LS831WU, LS750WU, LS850WU, LS860WU, LS920WU, LS921WU, PX728-4K, PX748-4K Please make sure the below webpage password is set in ViewSonic Network control first due to SB-327 law requirement.   1. Enter the IP address of the projector in the address bar of your browser and press E...

How to do Crestron E-control workaround due to Adobe Flash player not being supported?

Step 1  Download and install a Flash Player. “Download the Flash Player projector” from Adobe: https://www.adobe.com/support/flashplayer/debug_downloads.html Step 2 Input the URL of the Crestron interface in the Flash Player: http://[projector.ip]/CrestronUI.swf Where [projector.ip] is the ViewSonic projector’s IP address.

What to do if the image is too dim from the projector?

1.Please increase the Contrast and Brightness in OSD menu.   2.Check the light source level and make sure it’s on Full or Normal.   3.Turn off or reduce environmental luminance where the projector is in use.

Why a black border on the top/bottom or sides of the image from the projector?

Please check below:   1.Plesae refer to the user guide and adjust Aspect ratio with example below.   2. It could be the format of the movie since not all movies are formatted in 16:9. Some are formatted wider than 16:9 which will create black borders on the top and bottom of the screen.

How to solve “Out of range” when connecting PC/laptop to a projector?

Please refer to this FAQ.

How to download the latest drivers for my projector

Option 1: Download from the ViewSonic Website Go to http://www.viewsonic.com/us/downloads_section/ Enter the Product Name, Product series and model number. Select the driver based on the operating system of your computer. Once the file downloads, double-click to open and start the installation. If you select Save, double-click on the downl...