Skip to main content

How to disable IFP5550/6550/7550/8650 USB port?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70   Please use remote control to enter debug menu via pressing INPUT 9 9 1 in sequence, then go to Other Setting--àUSB Disk Enable a...

Is it possible to display the resolution at 800x600 on whole screen with the same image quailty?

To obtain better image quality, please set the resolution at least at 1920x1080.

Is there any recommended slot-in PC which can support vPro and TPM?

VPC14-WP-x and VPC12-WP-x can support both Intel® vPro and TPM 2.0.

Can IFP7550 HDMI out show the annotation layer to second display?

Yes, the HDMI out on the IFP7550 will show the annotations on the second display.

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly  3. If you connect from PC, please make sure the com port is correctly chosen.         4. It's recommended to vController to control the Viewboard by RS232.     Please r...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

What to do if "No Signal" appears on the ViewBoard while connecting an external device (HDMI, USB-C, or PC)?

Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...

What USB WiFi dongle/adapter is supported on IFP series?

See below the list of compatibale Wifi dongles for the IFP series. Models Supported   Wi-Fi dongle IFP4320 VSB050 LB-WIFI-001  IFP30 VSB050 LB-WIFI-001 IFP32 / IFP32-2 VSB050 VB-WIFI-002 VB-WIFI-004 TP Link     TL-WN725N IFP33 VSB050 VB-WIFI-...

Why does my IFP HDMI OUT only display the onboard Android system and not the input source I am currently connecting to the IFP?

Issue: When I connect an HDMI input source to my IFP and then connect an external monitor via HDMI out, the external monitor only displays the IFP's Android interface instead of the HDMI input source. Solution: To resolve this issue, follow these steps: Using your IFP's remote control, press the Input button and then press 991 to acc...

IFP105S - Why Is My OPS showing no Signal After the Firmware Update?

IFP105S - No signal With the latest firmware version 20240429, the OPS EDID is set to 5K by default.  This setting may cause a "No Signal" issue after the firmware update when using the VPC25 or other OPS. To resolve this issue, we have added a switch in the Android settings that allows the EDID to be set to 4K to solve the No signal....

ViewBoard Support

General Questions Interactive Display Technical Documents

General InquiriesContact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.