What are the remote's button functions for the DVLED display?

Solution Please refer to the following diagram below. This information can also be found in each Direct View LED Display's respective User Guide. Recommended Links "Why is the DVLED Display remote control having trouble with sensitivity or not working?" "How do I lock the remote control for my DVLED Display?"

How do I adjust the LED Module edge brightness on my DVLED Display?

When you find that the edge brightness of the LED module is different from that of the adjacent modules, the following procedure below can be followed in order to resolve the problem. Solution Step 1: Use the USB B-to-A cable and HDMI cable to connect the monitor to the computer, and switch the monitor's input source to HDMI. Step...

How do I adjust the overall brightness on my DVLED Display?

After replacement of a particular LED module, brightness may be slightly different than that of other modules. At this point, manual calibration is required. In order to troubleshoot this problem, the following procedure can be followed. Solution Step 1: Use the USB B-to-A cable and HDMI cable to connect the monitor to the computer, ...

After DVLED installation, how do I ensure consistent LED brightness?

Solution After replacing the LED module, you may find that the overall or edge brightness of the replaced module is different from other modules. Please adjust it according to the following debugging processes (click to view): Overall Brightness Edge Brightness

I'm a DVLED installer, what do I need to do after installation?

Solution Step 1: Turned on power to ensure all modules of the LED display are working properly. Used Vacuum Suction Tool to remove and reinstall any required LED modules Step 2: Dehumidification Maintenance Step 3: “Customer Maintenance Notice” explained to customer onsite. User reminded how to turn on/off the display (partition power)...

Why is RS232 not properly working on my DVLED Display?

Solution This may be an issue related to the settings.  Please check the RS232 settings when you encounter this issue: Also, check the RS232 pin definition: Note: RS232 does not need crossover If the user cannot use RS232 or Crestron to remotely turn on the power, refer: "Why can't RS232 be used to Power on/off the dv...

How do I update my DVLED Display's firmware?

Solution The LED display motherboard firmware can be set to update automatically or manually. To set to automatically update, please refer to "How do I set the DVLED Display to automatically update firmware?" If you don’t want to update automatically, you can also manually update via OTA or USB. The steps to manually update firmware can be...

How do I install LED modules on a DVLED display?

Answer: When installing the module, first align the edges with the adjacent LED module(s) and then carefully install the module onto the cabinet. If the edges are raised, lightly tap the edges of the module with your palm to make it fit. Note: Do NOT tap the LED Modules hard. If they are not going in after being lightly tapped, refer to this...

Should DVLED installation be done with Power On or Power Off?

Answer: DVLED displays can only be powered on when the System Control Box has been installed. The LED Modules are to be installed after. However, when installing the LED Modules, it is recommended to install with the power turned on, in order to assess display issues. It's better to replace as you go, since finding an issue after many tiles...

How do I remove LED Modules from the DVLED Display?

Solution  Step 1: Wear anti-static gloves before handling the LED Modules. Step 2: Remove the Vacuum Suction Tool from the box and press its power switch to use it. Please charge it with the included power supply and make sure the vacuum suction tool is kept in a fully charged state. Step 3: Move the Vacuum Suction Tool to t...