How to enable FollowMeAI casting

How to open up multiple tabs in browser?

How to play video and audio?

You can see how to play videos in this tutorial: You can see how to play audios or music in this tutorial:

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF:       When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed.    With this connection, both built-in and external speakers will output audio.        You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP.  When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is  turned on. <Note> Not all HDMI ports on IFP suppo...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

Why does the projector fan stay on after the unit is turned off?

This is normal operation. It is either a temporary cooling phase (3–5 mins) or a result of the Network Standby feature being enabled. Detailed Explanation: 1. Cooling Down Period Behavior: The fan remains on for 90 seconds to 5 minutes after pressing the power off button. Purpose: To dissipate residual heat from the lamp. Do not unplug ...

Why is my monitor not detected by the Firmware Update Tool?

Please make sure to use “FW_Update_Tool_v1.08”. Please follow the step by step instructions below to resolve the problem. When the program is initialized, the error message shown below will appear. A Windows error message might also pop up few seconds later. Please close the program and the error messages, then follow the in...

Why can’t my monitor automatically detect a source?

The "Auto Detect" feature is disabled by default on many models. You must manually enable it within the OSD menu to allow the monitor to switch between active ports automatically. Step-by-Step Instructions: Press the physical button to call up the OSD Main Menu. Navigate to the [Input Select] section. Locate [Auto Detect] at the bo...

Why can’t my monitor automatically detect a source?

The "Auto Detect" feature is disabled by default on many models. You must manually enable it within the OSD menu to allow the monitor to switch between active ports automatically. Step-by-Step Instructions: Press the physical button to call up the OSD Main Menu. Navigate to the [Input Select] section. Locate [Auto Detect] at the bo...