How can I lock the power function on IFP5550/IFP6550/IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then power button can ...

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly  3. If you connect from PC, please make sure the com port is correctly chosen.         4. It's recommended to vController to control the Viewboard by RS232.     Please r...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

What USB WiFi dongle/adapter is supported on IFP series?

See below the list of compatibale Wifi dongles for the IFP series. Models Supported   Wi-Fi dongle IFP4320 VSB050 LB-WIFI-001  IFP30 VSB050 LB-WIFI-001 IFP32 / IFP32-2 VSB050 VB-WIFI-002 VB-WIFI-004 TP Link     TL-WN725N IFP33 VSB050 VB-WIFI-...

Why does my IFP HDMI OUT only display the onboard Android system and not the input source I am currently connecting to the IFP?

Issue: When I connect an HDMI input source to my IFP and then connect an external monitor via HDMI out, the external monitor only displays the IFP's Android interface instead of the HDMI input source. Solution: To resolve this issue, follow these steps: Using your IFP's remote control, press the Input button and then press 991 to acc...

IFP105S - Why Is My OPS showing no Signal After the Firmware Update?

IFP105S - No signal With the latest firmware version 20240429, the OPS EDID is set to 5K by default.  This setting may cause a "No Signal" issue after the firmware update when using the VPC25 or other OPS. To resolve this issue, we have added a switch in the Android settings that allows the EDID to be set to 4K to solve the No signal....

What should I do when there is no signal on the ViewBoard when connecting a long HDMI cable?

ps. This article is applied to IFP6552-1A/1B, IFP7552-1A/1B and IFP8652-1A/1B Please replace HDMI premium certificated cable. If still have problem, please follow below instructions to adjust settings on the Debug menu for better compatibility. 1.    Update firmware to the latest version (20221201 or later). 2.    Enter Debug Menu by p...

What to do if VPC15-WP-3 can not find Wi-Fi 6 (802.11ax) wireless routers and access points in Windows?

Applied model: VPC10/12/14/15/16/17 running Windows Please update to the latest Wi-Fi driver on VPC. For more information, please refer to this article.

How to install the WPS Office application in the Android module for IFP?

The Android operating system is an open-source platform that will allow you to install custom applications even when the Google Play store is not available. Follow the steps below to install the WPS Office application.  Important: By installing the WPS Office application you acknowledge the risk of installing a third-party application. ...

When I login Google Drive or OneDrive, is it possible not to reveal the password letter by letter?

The login page is design by Google(Google Drive) or Microsoft(OneDrive), so we cannot change the typing password in the letters are visible and then hide design.