Passer au contenu principal

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF:       When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed.    With this connection, both built-in and external speakers will output audio.        You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

Is there any recommended RS232 software to control IFP7550 by ASCII command?

You may control IFP7550 by Hercules software. Please have "HEX" checkbox unchecked and key in ASCII command with <CR> at the end.

What’s the LED backlight life of IFP6550?

The LED backlight life of IFP50 series is 30,000 Hours Min.

How to solve the issue of browser time out while accessing to any webpage with my IFP7550?

Please configure the networks firewall settings to grant pass-through authentication to IFP7550.

How to prevent from annotate on ViewBoard Cast by mobile devices?

You can disable the “Touch and Annotate from Mobile” function in setting.

How can I adjust color temperature on IFP?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**30, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**30, IFP**70     Due to Android limitation, color temperature is only adjustable in other source(HDMI/PC, etc), not in Embd player...

Where do I find IFP50/30/70 series touch driver for Mac?

Please download the touch driver for Mac in below link or visit the product page on our website.    IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download

How to make sound output from external speaker bypass integrated speaker in IFP30/50 series?

Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.

What to do when the touch function has no response on the ViewBoard?

If touch fails across all input sources, you can perform a system initialization using the [INIT TV] command in the Debug Menu. Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Execute Initialization: Locate and select [INIT TV] from the pop-up menu. System Restart: The dev...

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.

ViewBoard Support

General Questions Interactive Display Technical Documents

Questions généralesNous contacter

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.