Passer au contenu principal

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.

Where do I find IFP50/30/70 series touch driver for Mac?

Please download the touch driver for Mac in below link or visit the product page on our website.    IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download

How can I lock the menu and input function on IFP5550/IFP 6550/IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the menu and inpu...

How can I lock the front panel buttons on IFP5550/IFP6550/ IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. . Please refer either method below:   You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the font panel but...

How can I adjust color temperature on IFP?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**30, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**30, IFP**70     Due to Android limitation, color temperature is only adjustable in other source(HDMI/PC, etc), not in Embd player...

How do I wake up my IFP50 series in standby mode?

IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input.   Supported input sources:   1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.

Can IFP7550 HDMI out show the annotation layer to second display?

Yes, the HDMI out on the IFP7550 will show the annotations on the second display.

Is there any recommended RS232 software to control IFP7550 by ASCII command?

You may control IFP7550 by Hercules software. Please have "HEX" checkbox unchecked and key in ASCII command with <CR> at the end.

What’s the LED backlight life of IFP6550?

The LED backlight life of IFP50 series is 30,000 Hours Min.

Why my MacBook with MacOS v10.11 can't get touch feedback from IFP7550?

It's a software limitation from MacOS. Please upgrade MacOS to v10.13 or later to solve the issue.

ViewBoard Support

General Questions Interactive Display Technical Documents

Questions généralesNous contacter

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.