How to set the OSD pivot feature to auto when it is greyed out in the OSD menu?

Temporarily select a different OSD rotation option and then set the Auto option again. If the option is still greyed out, apply All Recall from the monitor’s OSD Setup Menu.

How do I update my monitor's firmware?

For the best display performance and to resolve any known issues, it is best to keep your monitor updated with the latest firmware version. With the USB cable and firmware update tool, you can easily update your monitor firmware any time. To update the firmware, do the following: 1. Click on the Advanced sub-menu, then Information. ...

How to Download and Enable the Auto Pivot Feature?

The Auto Pivot feature is now integrated into the ColorPro Display Manager software; there is no longer a standalone download for Auto Pivot. Steps: Visit the [ColorPro Software Download page]. ColorPro Software Download | ViewSonic or by clicking here. Download and install ColorPro Display Manager for your specific OS (Windows or M...

Why is the auto-pivot function not able to detect my monitor’s orientation?

Auto-Pivot requires DDC/CI enabled, OSD Pivot set to Auto, and the dedicated software running in the background. Troubleshooting Steps: Configure Monitor OSD Settings: Open the [Setup Menu]. Ensure [DDC/CI] is toggled to [On]. Set [OSD Pivot] to [Auto].                     Enable Control Software: Ensure vDisplay Mana...

Why is my monitor not detected by the Firmware Update Tool?

Please make sure to use “FW_Update_Tool_v1.08”. Please follow the step by step instructions below to resolve the problem. When the program is initialized, the error message shown below will appear. A Windows error message might also pop up few seconds later. Please close the program and the error messages, then follow the in...

Why can’t my monitor automatically detect a source?

The "Auto Detect" feature is disabled by default on many models. You must manually enable it within the OSD menu to allow the monitor to switch between active ports automatically. Step-by-Step Instructions: Press the physical button to call up the OSD Main Menu. Navigate to the [Input Select] section. Locate [Auto Detect] at the bo...

Do VP series monitors support Apple Mac Thunderbolt connections?

Yes, fully supported. Every Apple Mac with a Thunderbolt port is designed to output a DisplayPort signal, ensuring 100% compatibility with ViewSonic monitors via the appropriate cable or direct connection. Compatibility Breakdown: Thunderbolt 3 / 4 / 5 / USB4 (USB-C Form Factor): Status: Fully Compatible. Mechanism: These ports ...

Why doesn't the OSD menu auto-rotate to match the monitor's orientation?

The [Auto Pivot] feature for the OSD menu must be manually enabled in the monitor's settings or synced via the vDisplay Manager software. Step-by-Step Instructions: Open OSD: Press the monitor buttons to bring up the [Main Menu]. Navigate to Setup: Go to the [Setup Menu] tab. Enable Auto Pivot: Locate the [Auto Pivot] setting and t...

Why is Auto Pivot not working on macOS, and how to fix it?

To make auto pivot work, the communication between OS and monitor is necessary. In Mac OS X or prior version, such communication is done by HDMI signal. However, in Mac OS Sierra and later, Apple changed the behavior in which this is no longer communicated with HDMI signal.   Thus, it's necessary to connect both VP2468/VP2768 and iMac by a ...

Cannot open vDisplay Manager. A pop up indicates that the "RtHubSSContrl.exe " file is missing.

There are two methods to re-start this service that may fix the issue:       1. Uninstall vDisplay Manager, and reinstall it, try to launch vDisplayManager again. 2. Press the “Windows Key + R” to open the “Run” window, and input “services.msc”.  Find “Realtek Hub Wakeup Service”, and start it.  If there is a warning messag...