How to Enable 180Hz Refresh Rate on my ViewSonic monitor?

To enable 180Hz refresh rate on your monitor, you need to turn on Overclocking in the monitor's On-Screen Display (OSD) Menu. After turning on Overclocking, you then can set the refresh rate to 180 Hz under your computer's “Display” settings. For example, in Windows go to Settings > System > Display >  Advanced display to set the refr...

How can I select 165Hz on XG2703-GS?

You can navigate to manual Image adjust on OSD menu.   Select Overclocking -> 165Hz.    

Can I Calibrate my sRGB or AdobeRGB monitor’s Luminance value below 80cd/m^2?

Can I Calibrate my sRGB or AdobeRGB monitor’s Luminance value below 80cd/m^2?   NO

Why does brightness go down on VP2785-4K while calibrating?

Why does brightness go down on VP2785-4K after calibration?   Because on VP2785-4K, Energy saving is set to ON by default for power saving.     Please turn off the Energy saving to OFF and proceed with calibration.

What is the Native luminance of sRGB and AdobeRGB on colorbration+ ?

What is the Native luminance of sRGB and AdobeRGB on colorbration+ ?   Native Luminance of sRGB is 120cd/m^2 Native Luminance of AdobeRGB is 160cd/m^2

VG2440V Linux OS support list.

VG2440V supports all versions of Linux OS.

What is USB speed and refresh rate of VG2756-4K under USB-C connection?

The VG2756-4K (via USB-C) by default can display 4K 60Hz, and the OSD setting for "USB 3.2" is Off.  If the user turns "USB 3.2" On, then a USB-C connection can only display 4K 30Hz. There's not enough bandwidth for USB 3.2 speeds when connected via USB-C to output 4K 60Hz.   This situation will only happen on a USB-C connection. If u...

What is USB speed and refresh rate of VG2755-2K/VG2455-2K under USB-C connection?

The VG2755-2K/VG2455-2K (via USB-C) by default can display 2K 60Hz, and the OSD setting for "USB 3.2" is Off.  If the user turns "USB 3.2" On, then a USB-C connection can only display 2K 30Hz. There's not enough bandwidth for USB 3.2 speeds when connected via USB-C to output 2K 60Hz.   This situation will only happen on a USB-C connec...

Why can't I adjust the brightness to max, or select a color calibration mode?

For some VP models, the Energy Saving Mode is On by default. Once turned Off, the brightness level can be adjusted to max and color calibrations can be selected.  

What to do when there is touch inaccuracy of the TD monitor under Windows 10?

Please do touch calibrate follow below steps:   1. Move your mouse cursor to the bottom left of the screen. Right mouse click the Windows icon, then left mouse click “Run”.     2. Key in or copy:  shell:::{80F3F1D5-FECA-45F3-BC32-752C152E456E}  and select "OK".     3. The Tablet PC Settings will show up as below. You can select TD m...