What are the remote's button functions for the DVLED display?

Solution Please refer to the following diagram below. This information can also be found in each Direct View LED Display's respective User Guide. Recommended Links "Why is the DVLED Display remote control having trouble with sensitivity or not working?" "How do I lock the remote control for my DVLED Display?"

What are the power source requirement for DVLED?

Power Receptacle Type L5-30P, EU, UK, AU, CN  (may vary depending on region. double check power supply compatibility) Power Input Voltage Range 100-240 V ~ 50/60Hz Input Current 30A max @110V; 15A max@220V Leakage Current <0.25mA@240VAC Power Outlet quantity 1 (for 108", 135", 163"), 2 (for 216") *Recommended use on a singl...

What is the LED module specs for DVLED Displays?

LED module specs for DVLED Displays will vary by model. Please refer to the following table below:

What are the main installation differences between Wall-mount and Floor Stand setups for DVLED Displays?

Wall-mount Upper and lower bracket locations aligned and mounted first Upper bracket screw holes on the bottom Cabinets are installed before system control box is installed After upper and lower brackets installed, Cabinet "C" installed in the center position first. Next, Cabinets "B", "D", "E", "A" installed in this respective order...

What is a partitional power-on protection, and why is this design used for dvLED?

Electrical appliances at the moment of startup have a much higher current and power draw than normal operation. Since dvLED products are composed of many LED modules and if they are all turned on at the same time, a sudden increase in power draw may occur resulting in electrical wear and tear.  Solution To ensure the electrical ...

What should I do when I receive my Flight Case(s) for my DVLED product(s)?

Solution   Step 1: Insect the flight case and compare to pre-shipment photos; document any damage to the flight case on the BOL (bill of lading).  Step 2: Open the flight case and compare to pre-shipment photos; document any damage to the flight case on the BOL. If you have multiple Flight Cases per dvLED product, you may refer to "Why...

What is the Vacuum Suction Tool used for on DVLED Displays?

Answer: The Vacuum Suction Tool is used for removing LED Modules (or LED tiles) from the DVLED Display.  See "How do I remove LED Modules from the dvLED Display?" for more information on how to use the Vacuum Suction Tool.

Is there a trolley option for the 216" DVLED Display?

Answer: No. There is no trolley option offered at this time. The current available trolley options are for the 108", 135", 163" DVLED sizes.

How do I change the default startup channel (source) on my DVLED Display?

Answer: You can set the entry screen after the display is turned on. From the main menu go to Display settings then Startup & Shutdown. Choose whether to continue the input source from last shutdown, or to specify a specific source (Home, HDMI, myViewBoard Display, or vCast).

What is a "hard calibration" for DVLED Displays?

Answer: "Hard calibration" is a form of hardware calibration that fine tunes the color and brightness for specific LED modules on the DVLED Display.  Situations in which hard calibration may be required: LED Module position is changed or LED Module is replaced with a spare, LED Modules from a different color batch need to be used, LED M...