What default app can be displayed in the ViewBoard vLauncher?

Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.    

Can IFP7550 play 4K2K content?

Yes, IFP7550 can play 4K2K content.

Is it possible to display the resolution at 800x600 on whole screen with the same image quailty?

To obtain better image quality, please set the resolution at least at 1920x1080.

How to avoid unauthorized cast-in via Airplay?

To disable Airplay Service in vCast do the following：   Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service   To enable Airplay follow steps 1-3 and check Airplay Service

What to do as it shows a warning message “Program not activated, will exit in 30 minutes” when running vBoard?

vBoard will be activated automatically while Internet in connected. Please make sure your IFP display is well connected to Internet.

How can I setup touch on extended display?

Please refer to this video.

How can I reset IFP5550/IFP6550/IFP7550/IFP8650 screen lock password?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP70. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70. You can press remote control buttons : INPUT 0 2 1 4 quickly in sequence to restore the password to default.

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF:       When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed.    With this connection, both built-in and external speakers will output audio.        You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly  3. If you connect from PC, please make sure the com port is correctly chosen.         4. It's recommended to vController to control the Viewboard by RS232.     Please r...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...