What is a "Customer Maintenance Notice" for dvLED displays?

Answer: The Customer Maintenance Notice is a document that should be explained to the customer on-site, immediately after dvLED installation (during or after software setup). The document contains crucial information regarding proper usage and maintenance critical to effectively extending the life cycle of the product.   Note: Full documen...

What are the power source requirement for DVLED?

Power Receptacle Type L5-30P, EU, UK, AU, CN  (may vary depending on region. double check power supply compatibility) Power Input Voltage Range 100-240 V ~ 50/60Hz Input Current 30A max @110V; 15A max@220V Leakage Current <0.25mA@240VAC Power Outlet quantity 1 (for 108", 135", 163"), 2 (for 216") *Recommended use on a singl...

What is a Transfer Board on a DVLED Display?

The Transfer Board (also known as a Transfer Card) is an internal component that facilitates signal connections between LED modules and the cabinet. Note: Current models have largely transitioned to "3-in-1 Boards." This article is for legacy product maintenance and technical reference only. Key Functions: Signal Supplementing: Routes ...

What is "Dehumidification" service for dvLED displays?

The Dehumidification service (or Dehumidification process) can be used to protect the LED module(s) by displaying a dark screen and gradually transitioning to a lighter screen. The concept is to gradually remove humidity by slowly heating up the circuitry - since a lighter colored screen uses more power than a darker colored screen. The total p...

What questions do I need to consider before installing my DVLED Display?

To ensure a seamless installation, a comprehensive assessment of the mounting location, structural integrity, power supply, and site logistics is mandatory. Steps and Checklist: Installation Environment Define the exact mounting location and ensure there is ample room for equipment (e.g., tools, ladders, scaffolding). Power and C...

What tools are required for a dvLED Display installation?

Proper tools are essential for precise alignment and preventing electronic damage. The list includes measurement instruments, power tools, and mandatory ESD protection. Steps: Prepare tools according to the following categories: Measurement & Alignment Self-leveling laser level. Stud sensor/finder (multi-depth/material). 4-vial...

What are the differences between TFT LCD and Direct View LED (dvLED)?

The core difference lies in the light source: TFT LCD uses a backlight filtered through liquid crystals, whereas dvLED features self-emissive pixels that turn on/off individually for superior contrast and efficiency. Comparison Highlights: Light Emission: TFT LCD requires a constant backlight, while dvLED is self-emissive, meaning each...

What should I do if the LED(s) on the DVLED display is unlit?

Answer: Please refer to the LED dead pixel specification in the User Manual to determine if it needs replacing, or contact the local service provider for proper assessment. Click each model to view detailed replacement specificationsDeactivated pixels determination for LED module replacement based on Acceptance Criteria for 1) whole dis...

Can we use display grouping function on 2nd gen LDM & LDC ?

Yes. Please make sure you follow the below steps. Turn off Wireless hotspot on LDM/LDC. (Settings --> Network --> Wireless hotspot --> Disable) Use Mouse to select the display in vCast under Display group settings --> Device list

How much is the power output of LDS138-151's power socket (PC socket) on the back of the display ?

Max power output is 85Kw