Skip to main content

Does NMP-302w and NMP580-W support touch content?

NMP-302w and NMP580-W support EP5520T touch function, you can use these two models with EP5520T, then you will have touch function.

Can an antenna be connected to a commercial display?

ViewSonic Commercial Displays do not support antenna or coaxial cable connection.

EP5520/EP5520T vSignage cut-in S/N

    Product Cut in S/N EP5520T phase-in from UVE173100001 EP5520 phase-in from T91173300001

How to install Signage Manager License with CDM4900R/ CDM4300R/ CDM5500R/ CDM5500T?

1. Download the attached license file. 2. Select the correct Time Zone.  3. Please follow the below procedures to install the Signage Manager license:    license URL:https://support.viewsonic.com/helpdesk/attachments/33040907670

How to set up video wall in daisy chain?

Here’re major steps to set up video wall in portrait position for your reference. 1. Set up  monitor ID in OSD menu as 1~4 prior to mounting monitors.   2. Connect  IR sensor cable to monitor 1.   3. Connect  the PC to monitor 1 with DP cable firstly for easy setup & adjustment  afterwards.   4. Mounting  monitor 1/2/3/4 in portrait p...

Does my e-Poster Support Power Point presentations?

ViewSonic e-Posters do not support Power Point presentations natively.  There are 3 ways to achieve this purpose. 1.Use vSignage:   Models like EP4320/EP5520/EP5520T/EP5540/EP5540T have built in the vSignage. You are able to use the power point widget to publish your power point file from the computer to the e-Posters.   2. Connect a...

How to install vSignage License on EP5520 /EP5520T/ EP5540/EP5540T?

Requirements: - USB Flash Drive (FAT32 Formatted): How to format USB flash drive to FAT32 - vSignage license file, available on the Download section of the product's page* 1. Copy the license file (license-production_VSI.PKG) to the root directory of the USB flash drive. 2. Insert the USB flash drive into USB port of the display....

Which network ports should be opened for Signage Manager and media players?

 To ensure Signage Manager can discover and control players over a Local Area Network (LAN), please ensure that TCP 80, 8080, 443, and UDP 1900 are opened in your firewall settings. Port Configuration Table: Port TCP UDP Description 80 TCP Hypertext Transfer Protocol (HTTP), main communication port with legacy play...

How to prevent image quality loss when exporting from Signage Manager?

While editing content with Signage Manager, it will compress and save photo in lower quality. Please follow below procedures to replace the photo. 1. After finishing editing in Signage Manager, choosing “Export to USB”. 2. Open “File Explorer” and locate USB drive in SMIL/media folder. 3. Copy original photos to this folder and...

How to get back to the dashboard while content is playing via vSignage?

There are two methods to get back to the dashboard. 1. Press up button on the remote control to go to the dashboard 2. Connected to a mouse, directly press and hold anyone of the corner area, after successfully triggering the countdown, the corner area will flash in reverse (as shown in the figure). It will exit after ten seconds. 

Commercial Display Support

General Questions Digital Signage

General InquiriesContact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.