What are the communication settings to control IFP via RS232 and LAN commands?

RS232 Communication Setting  - Baud Rate Select: 9600bps (fixed) - Data bits: 8 bits (fixed) - Parity: None (fixed) - Stop Bits: 1(fixed)   LAN Communication Setting - Type: Ethernet  - Protocol: TCP/IP - Port: 5000 (fixed) - Cross subnet: No - Logon Credentials: No

Why can't the VX3258-PC-MHD output more than 60Hz when connected to PS5?

Please check if the game Performance Mode in PS5 is enabled. In PS5: Setting > Save Data and Game/App Settings > Game Presets   If the above does not help, please refer to the official PS5 troubleshooting guide: https://www.playstation.com/en-us/support/hardware/ps5-4k-resolution-guide/

Is VG2448 compatible with Auto Pivot function?

VG2448 doesn’t support Auto Pivot Function but integrated with below features instead. 1. VG2448 supports +/- 90 degree pivot, and users need to do manual adjust for screen rotate or OSD rotation. 2. There's "OSD pivot" option in OSD menu l   VG OSD tree

How to enable/disable VX3258-2KC-MHD crosshair toggle?

If you see a crosshair in the middle of your VX3258-2KC-MHD monitor’s screen, please perform the step below.                    With the monitor powered on, press the joy key downward on the back of the monitor to toggle the crosshair on or off. To bring it back up press downward on the joy key again.

Why is there touch response randomly on my TD2220/TD2421 even nobody touches the screen?

These models are optical touch monitors which use two CMOS cameras (optical sensors) placed in the corners at the top of the screen as well as three reflectors (light strips). These cameras are used to look across the entire touch surface for touch events. When an object touches the screen, it blocks some of the light being received by the se...

What is "Low Input Lag" and which one should I choose?

Input lag means the time difference between when user controls PC and sees the response on monitor.      There is a trade-off to picture/video performance. If no particular demand, it is suggested to set it to off.

Why my ViewSplit template is not being centered properly?

If you run into the templates not being centered properly, please follow the below steps:       1. Right click on the desktop icon of ViewSplit and Select “Properties”.    2.When the properties window pops up select the tab “Compatibility”. 3. Select “Change high DPI settings”.    4.Check the “Program DPI” box and the drop down “I op...

What are the ViewBoard Network Requirements?

Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099

How can I freeze CDE7500/CDE8600 screen?

 You can press FREEZE button on remote control to freeze the screen.

How to disable IFP5550/6550/7550/8650 USB port?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70   Please use remote control to enter debug menu via pressing INPUT 9 9 1 in sequence, then go to Other Setting--àUSB Disk Enable a...