Commercial DisplaySupport - ViewSonic Luxembourg

What is tilling mode for Videowall and how to set it correctly?

<Tiling Mode> In Tile Mode you can view an image in a larger scale by connecting multiple monitors. After all the displays are installed properly to a video wall, you need set the position of each display to determine how to display the input image. Once the position is set, the video source (e.g. computer) identifies the number of connect...

How can I add other widgets to the Signage manager software?

You can refer below steps to use other widgets.

How to enable debug mode on commercial displays?

1. Download ADB from: https://developer.android.com/studio/command-line/adb.html 2. Press MENU 9 9 1 on the display's remote control to show the Service Menu or Debug Menu. 3. EP5540/ EP554T/EP5542/EP5542T: Service Menu > OS Setting > ADB Enable 4. CDE6520/CDE7520/CDE8620: Debug Menu > System Debug > ADB Switch 5. CDE4320/...

How to set up video wall in daisy chain?

Here’re major steps to set up video wall in portrait position for your reference. 1. Set up monitor ID in OSD menu as 1~4 prior to mounting monitors. 2. Connect IR sensor cable to monitor 1. 3. Connect the PC to monitor 1 with DP cable firstly for easy setup & adjustment afterwards. 4. Mounting monitor 1/2/3/4 in portrait p...

How to check CDX series , videowall, model RS232 daisy chain working correctly

1. Is it correct of RS232 daisy chain cable ? 2. In OSD menu, General settings -> Eco mode please set to Normal. (If set to Low power standby, the unit can power OFF but can’t power ON) 3. The RS232 daisy chain cable is 2.4mm – 2.4mm

Can an antenna be connected to a commercial display?

ViewSonic Commercial Displays do not support antenna or coaxial cable connection.

What's the Signage Manager newest version? How can I update it?

You can click "Help"-->"Check update" in Tool bar to check is your Signage Manager newest or not, if not, you can click "Download" to update your Signage Manager.

What are the requirements or limitation on the using cables of Videowall?

Support HDMI Ver. 1.4b DVI cable can't exceed 5M, otherwise, a DVI extender is required HDMI cable can't exceed 5M, otherwise, a HDMI extender is required LAN Cable can't be used to carry video signal directly Signal cable for each display should be separated from each other, twists cables together is not allowed Device for signal transmi...

What is iframe and why CMS software, Signage Manager and vSignage couldn't an inline frame?

Definition and Usage The <iframe> tag specifies an inline frame. Example An inline frame is marked up as follows: <iframe src="https://www.w3schools.com"></iframe> An inline frame is used to embed another document within the current HTML document. Browser Support Why Signage Manager and vSignage couldn't an inline fra...

How to make sure the CDE4302 can meet the 350 nits brightness

According EE class A requirement we need to set default from 300-350 nits to 210-245 nits , but it may cause CDE4302 has lower brightness. Here are the testing equipment and method for testing the 350 nits spec. 1. Using KONICAMINOLTA CA-210 or CA-310 pattern generator and color meter to get the following testing result. 2. Increas...