How can I lock the touch function on IFP5550/IFP6550/ IFP7550/IFP8650?

Applied model:   1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the touch fun...

How do I wake up my IFP50 series in standby mode?

IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input.   Supported input sources:   1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.

The Fluo Yellow colour that shows on IFP5550 is becoming a yellow greenish, how can I do?

You can set color temperature to Cold or drag the dot to right to adjust in Display setting. Please note when you set color temperature to Cold or drag the dot to right to adjust, the blue light also increase.

Is it possible to display the resolution at 800x600 on whole screen with the same image quailty?

To obtain better image quality, please set the resolution at least at 1920x1080.

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF:       When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed.    With this connection, both built-in and external speakers will output audio.        You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

Can IFP7550 HDMI out show the annotation layer to second display?

Yes, the HDMI out on the IFP7550 will show the annotations on the second display.

How can I lock the power function on IFP5550/IFP6550/IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then power button can ...

What to do when: "Machine Code: 667406643860" shows up on my Viewboard after a reset?

This happens because vCast requires a license key to activate. Please ensure your Viewboard is connected to the internet to get “Registration OK” to show on screen to work.

How to avoid unauthorized cast-in via Airplay?

To disable Airplay Service in vCast do the following：   Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service   To enable Airplay follow steps 1-3 and check Airplay Service

What are the ViewBoard Network Requirements?

Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099