How can I replace the IFP50 series’ boot up image and animation?

Please find the instructions and requirements in the attached PDF. File URL:https://support.viewsonic.com/helpdesk/attachments/33039346408

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.

How can I setup touch on extended display?

Please refer to this video.

How to disable IFP5550/6550/7550/8650 USB port?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70   Please use remote control to enter debug menu via pressing INPUT 9 9 1 in sequence, then go to Other Setting--àUSB Disk Enable a...

Where do I find IFP50/30/70 series touch driver for Mac?

Please download the touch driver for Mac in below link or visit the product page on our website.    IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download

What default app can be displayed in the ViewBoard vLauncher?

Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.    

Why can't I adjust the Hue and Sharpness settings on the slot-in PC and HDMI source?

The Hue and Sharpness settings are only adjustable for the Analog source such as AV in /VGA source.

What to do when the touch function has no response on the ViewBoard?

If touch fails across all input sources, you can perform a system initialization using the [INIT TV] command in the Debug Menu. Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Execute Initialization: Locate and select [INIT TV] from the pop-up menu. System Restart: The dev...

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP.  When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is  turned on. <Note> Not all HDMI ports on IFP suppo...

Can I use my Chromebook to cast to the ViewBoard screen?

Yes. Install the vCastSender Chrome Extension from the Chrome Web Store to wirelessly cast your screen to the ViewBoard. Steps: Install Extension: Open the Chrome browser, go to the Chrome Web Store, and search for and install the [vCastSender] extension. Network Connection: Ensure both your Chromebook and ViewBoard are connected to t...