Skip to main content

Why is the auto-pivot function not able to detect my monitor’s orientation?

Auto-Pivot requires DDC/CI enabled, OSD Pivot set to Auto, and the dedicated software running in the background. Troubleshooting Steps: Configure Monitor OSD Settings: Open the [Setup Menu]. Ensure [DDC/CI] is toggled to [On]. Set [OSD Pivot] to [Auto].                     Enable Control Software: Ensure vDisplay Mana...

Why doesn't the OSD menu auto-rotate to match the monitor's orientation?

The [Auto Pivot] feature for the OSD menu must be manually enabled in the monitor's settings or synced via the vDisplay Manager software. Step-by-Step Instructions: Open OSD: Press the monitor buttons to bring up the [Main Menu]. Navigate to Setup: Go to the [Setup Menu] tab. Enable Auto Pivot: Locate the [Auto Pivot] setting and t...

How to set the OSD pivot feature to auto when it is greyed out in the OSD menu?

Temporarily select a different OSD rotation option and then set the Auto option again. If the option is still greyed out, apply All Recall from the monitor’s OSD Setup Menu.

Do the VP2468’s USB ports support Apple device power charging?

The 4 USB ports support 5V 900mA Apple device power charging. The fourth downstream USB port can support device charging while the display is on “standby mode”, but all other ports will only charge devices while the display is “on”. As of Dec. 11 2020, VP models support standby model with charging function via 2.1A USB port of monito...

Do VP series monitors support Apple Mac Thunderbolt connections?

Yes, fully supported. Every Apple Mac with a Thunderbolt port is designed to output a DisplayPort signal, ensuring 100% compatibility with ViewSonic monitors via the appropriate cable or direct connection. Compatibility Breakdown: Thunderbolt 3 / 4 / 5 / USB4 (USB-C Form Factor): Status: Fully Compatible. Mechanism: These ports ...

Why didn't my Windows desktop automatically rotate to fit the orientation of the monitor when the Auto-Pivot function is enabled on my Windows OS?

For optimal performance, please make sure your monitor is fully up to date. If your VP2468 monitor’s firmware version is M001 or M002, please make sure your OSD Pivot and Auto-Pivot functions are, both, set to Auto.

How to enable the input source auto detect function?

Please open the OSD menu and navigate into “Input Select”. Then, select Auto-Detect and make sure it is set to ON.

What ViewSonic monitors can support Auto Pivot function?

As of Dec. 8 2020, below VP models support Auto Pivot function.   VP2458, VP2468, VP2468a, VP2768, VP2768a, VP2785-4K VP2768-4K, VP2785-2K, VP2771, VP2775, VP3268-4K.   Please refer to below steps to enable the function.   1.Download and install vDisplay Manager. 2.Follow UG for connection and setting. 3.Enable DDC/CI in monitor OSD to...

Why can’t my monitor automatically detect a source?

The "Auto Detect" feature is disabled by default on many models. You must manually enable it within the OSD menu to allow the monitor to switch between active ports automatically. Step-by-Step Instructions: Press the physical button to call up the OSD Main Menu. Navigate to the [Input Select] section. Locate [Auto Detect] at the bo...

Why is my monitor not detected by the Firmware Update Tool?

Please make sure to use “FW_Update_Tool_v1.08”. Please follow the step by step instructions below to resolve the problem. When the program is initialized, the error message shown below will appear. A Windows error message might also pop up few seconds later. Please close the program and the error messages, then follow the in...

LED Monitor Support

General Questions ColorPro™ (VP series)

General InquiriesContact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.