ViewBoardTámogatás - ViewSonic Hungary

How can I lock the touch function on IFP5550/IFP6550/ IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the touch fun...

What to do if "No Signal" appears on the ViewBoard while connecting an external device (HDMI, USB-C, or PC)?

Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...

What is the resolution of IFP7550 OSD menu?

The resolution of IFP7550 OSD menu is 1080P.

How to avoid unauthorized cast-in via Airplay?

To disable Airplay Service in vCast do the following： Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service To enable Airplay follow steps 1-3 and check Airplay Service

How do I wake up my IFP50 series in standby mode?

IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input. Supported input sources: 1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.

How can I lock the power function on IFP5550/IFP6550/IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then power button can ...

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly 3. If you connect from PC, please make sure the com port is correctly chosen. 4. It's recommended to vController to control the Viewboard by RS232. Please r...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

What USB WiFi dongle/adapter is supported on IFP series?

See below the list of compatibale Wifi dongles for the IFP series. Models Supported Wi-Fi dongle IFP4320 VSB050 LB-WIFI-001 IFP30 VSB050 LB-WIFI-001 IFP32 / IFP32-2 VSB050 VB-WIFI-002 VB-WIFI-004 TP Link TL-WN725N IFP33 VSB050 VB-WIFI-...

Why does my IFP HDMI OUT only display the onboard Android system and not the input source I am currently connecting to the IFP?

Issue: When I connect an HDMI input source to my IFP and then connect an external monitor via HDMI out, the external monitor only displays the IFP's Android interface instead of the HDMI input source. Solution: To resolve this issue, follow these steps: Using your IFP's remote control, press the Input button and then press 991 to acc...