Ugrás a fő tartalomra

What is a partitional power-on protection, and why is this design used for dvLED?

Electrical appliances at the moment of startup have a much higher current and power draw than normal operation. Since dvLED products are composed of many LED modules and if they are all turned on at the same time, a sudden increase in power draw may occur resulting in electrical wear and tear.  Solution To ensure the electrical ...

How do I adjust LED module edge brightness on my DVLED Display?

When you find that the edge brightness of the LED module is different from that of the adjacent modules, the following procedure below can be followed in order to resolve the problem: Solution Step 1: Use the USB B-to-A cable and HDMI cable to connect the display to the computer, and switch the display's input source to HDMI. Step 2...

How do I lock the remote control for my DVLED Display?

Solution To lock/unlock the infrared remote control, enter 1,1,6,9 on the remote control and press OK. To lock/unlock the remote control keypad, enter 1,1,6,8 on the remote control and press OK. Recommended Links "What are the remote's button functions for the DVLED display?" "Why is the DVLED Display remote control having troubl...

During servicing, where do I place the de-installed LED module(s) for a DVLED Display?

Answer: LED modules should be placed on a flat, anti-static, padded surface when swapping LED Modules. If there is no opening for the connectors, module should be placed bead-side down to prevent connector damage. Product Safety The following components on the LED module can be damaged if not handled well:  LED Bead damage diagram ...

How many Receiving Cards and Transfer Boards are there on a DVLED Display?

The number of Receiving Cards and Transfer Boards will vary by model. However, Since a 1x Receiving Card is required to connect with 1x Transfer Card, the number of Receiving Cards will be consistent with the number of Transfer Boards. Solution Complete information can be found in the "LED Display Product Engineering Specification" docu...

How do I install a DVLED display with a Floor Stand configuration?

Please refer to this link before beginning any Direct View LED Display installs. Solution Step 1: Install the Floor Stand Step 2: Install the System Control Box onto the Floor Stand Step 3: Install the Cabinets onto the Floor Stand, connect the System Control Box to the Cabinets Step 4: Install the LED Modules onto the Cabin...

How do I install a DVLED display with a Wall-mount configuration?

Please refer to this link before beginning any Direct View LED Display installs. Solution Step 1: Install the Wall-mount brackets Step 2: Install the Cabinets onto the Floor Stand, connect the System Control Box to the Cabinets Step 3: Install the System Control Box onto the Floor Stand Step 4: Install the LED Modules onto t...

Why is the power supply and other equipment work, but the DVLED Display is not displaying image?

Answer: If the LED display does not work, but the power supply and other equipment checks are working, it may be caused by a firmware conflict. Please perform mandatory firmware update under this circumstance.

How do I perform a mandatory firmware update for my DVLED Display?

Solution Step 1: Please contact customer service staff to obtain the mandatory firmware update file(s) Step 2: Copy the files to the outermost directory of the USB Step 3: Turn off the power of the LED display and plug in the USB Step 4: Press the power button to turn on the display, and immediately press the Menu butto...

How can I operate my DVLED Display?

The Direct View LED Display can be operated by either: 1) the Remote, 2) the Keyboard, 3) or RS232 For further details, please refer to this link and select the appropriate model to view the respective User Guide.

Közvetlen nézetű LED kijelző Támogatás

General Questions

Kapcsolatfelvétel

Kérjük, forduljon közvetlenül hozzánk, ha nem talál válaszokat és megoldásokat a ViewSonic termékeivel kapcsolatban.