What to do as it shows a warning message “Program not activated, will exit in 30 minutes” when running vBoard?

vBoard will be activated automatically while Internet in connected. Please make sure your IFP display is well connected to Internet.

What to do if "No Signal" appears on the ViewBoard while connecting an external device (HDMI, USB-C, or PC)?

Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...

What is the maximum USB cable length for ViewBoard Touch connection?

USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...

What's the difference if I'm running ViewBoard 2.1 with inactivated version?

Below features won't be included with ViewBoard 2.1 inactivated version. Handwriting:   Crescent Mode:   Page Ball Mode:   Pen (only 2 pens available):      

How to install custom apps in the Android module for IFP50 series displays?

Please follow below instructions to add apps:   The Android operating system is an open source platform that will allow you to install custom applications even when the Google Play store is not available. Follow the steps to begin installing custom applications.      1. Downloading the Application  a. Download the application (.apk) file ...

What is the USB Type-C specification and video streaming compatible device by IFP6570 and IFP8670?

ViewSonic’s IFP6570 and IFP8670 USB Type-C port supports the below specifications: 1. DP alt mode: supported with DP1.4 (4K@60hz) 2. Power delivery specification: 60W (5V3A、9V3A、12V3A、15V3A、20V3A) 3. USB data transfer rate specification: USB 2.0 (480 Mbps) Note: USB Type-C refers to the connector type, not the capability of...

How can I lock the menu and input function on IFP5550/IFP 6550/IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the menu and inpu...

Will units not on the same sub net will they still appear on vCastReceiver list?

No, it’s cross sub net network limitation and please input screen PIN-code for casting connection.

What model can be installed to VB-STND-003?

VB-STND-003 supports ViewSonic display up to 75" .

What’s the LED backlight life of IFP6550?

The LED backlight life of IFP50 series is 30,000 Hours Min.